AT89C52 – 8 bit Microcontroller. Eight Interrupt Sources, Programmable Serial Channel.Low-power Idle and Power-down Modes.
Package includes :
1 x AT89C52 – 8 bit Microcontroller
-4%
Microcontrollers
AT89C52 – 8 bit Microcontroller
- Compatible with MCS-51 Products
- Two 16-bit Timer/Counters
- Eight Interrupt Sources
- Programmable Serial Channel
- Low-power Idle and Power-down Modes
- 40-pin DIP
₹110.00 ₹115.00 incl. GST
Related products
-
Microcontrollers
PIC16F84A Microcontroller
- Only 35 single word instructions to learn
- All instructions single-cycle except for program branches which are two-cycle
- Operating speed: DC – 20 MHz clock input DC – 200 ns instruction cycle
- 1024 words of program memory
- 68 bytes of Data RAM
- 64 bytes of Data EEPROM
- 14-bit wide instruction words
- 8-bit wide data bytes
- 15 Special Function Hardware registers
SKU: n/a -
Microcontrollers
PIC12F675 Microcontroller
Fetures
High-Performance RISC CPUOnly 35 single word instructions to learnAll instructions are single cycle (1µs) except for program branchesOperating speed: DC – 20MHz clock inputInterrupt Capability8-Level Deep Hardware StackDirect, Indirect and Relative Addressing ModesSKU: n/a -
Microcontrollers
Atmega16 Microcontroller
- High-performance, Low-power AVR 8-bit Microcontroller
- Advanced RISC Architecture
- 131 Powerful Instructions – Most Single Clock Cycle Execution
- 32 x 8 General Purpose Working Registers
- Up to 6 MIPS Throughput at 16MHz
- Fully Static Operation
- On-chip 2-cycle Multiplier
- Nonvolatile Program and Data Memories
- 16k Bytes of In-System Self-Programmable Flash
- Optional Boot Code Section with Independent Lock Bits
- 512K Bytes EEPROM
- Programming Lock for Software Security
- JTAG (IEEE std. 1149.1 Compliant) Interface
- Boundary-scan Capabilities According to the JTAG Standard
- Extensive On-chip Debug Support
- Programming of Flash, EEPROM, Fuses, and Lock Bits through the JAGS Interface
SKU: n/a -
Microcontrollers
PIC16F77 – Flash 8kbyte 8MHz Microcontroller [Microchip]
- Special Microcontroller Features
- Fail-Safe Clock Monitor
- Power-On Reset
- Power-up Timer (PWRT) and Oscillator Start-Up Timer (OST)
- Two-Speed Start-Up mode
- Programmable Code Protection
- Power-Saving Sleeping Mode
- Peripheral Features
- Two 8-bit timer/counter with Prescalar
- One 16-bit timer/counter
- High source/sink current: 25mA
- Master Synchroonous Serial Port (MSSP)
- Parallel Slave Port (PSP): 40/44 pin-device only
- Low-Power Features
- Primary Run(XT, RC, Oscillator, 76 µA, 1MHz, 2V)
- RC_RUN (7µA, 31.25kHz, 2V)
- Timer1 Oscillator (1.8 µA, 32kHz, 2V)
- Wachtdog Timer(0.7 µA, 2V)
- Two-Speed Oscillator Start-up
- Analog Features
- 10-bit, up to 14-channel Analog-to-Digital Converter
- Dual Analog Comparators
- Programmable Low-Current Brown-out Reset (NOR) Circuitry
- Programmable Low-Voltage Detect (LVD)
- Oscillators
- Three Crystal modes: LP, XT, HS (up to 20 MHz)
- Two External RC modes
- ECIO (up to 20 MHz)
- 8 user-selectable frequencies
SKU: n/a
There are no reviews yet.