Shop
Showing 1873–1896 of 1946 results
-
Break out Boards
W25Q64 Storage 64Mbit 8MByte Data Flash module SPI Interface BV/FVinter
Ask for latest offers/availability : https://bit.ly/3chAMat
- IC: W25Q64FV
- Capacity: 64M-bit / 8M-byte
- Clock frequency: <104MHz
- Working voltage: 2.7V ~ 3.6V
- Current: 4mA
- Dimensions (LxWxH): 15.5 x 14.5 x 3.7 mm
SKU: PGI-00411810 - IC: W25Q64FV
-
3D Accessories
Wanhao Duplicator i3 V2.1 3D Printer (Semi-Assembled)
Ask For Availability :- https://bit.ly/2K34eVp
- Model: WANHAO i3 V2.1
- Pre-assembled steel frame Prusa i3 you ever had.
- Fully open source enables you to use any most up to date software.
- Extra-long 45mm LM8UU bearings guide the extruder assembly for better lateral tracking.
- Compatible Software: Repetier (Opensource), CURA (Opensource), MatterControl (Opensource), Simplify 3D (Details)
- File Transfer: microSD Card & USB
- Frame Color: Steel Frame (Powder Coated Black)
- The Z-Axis endstop switch comes secured to a height-adjustable bracket allowing the freedom to choose between any of your favorite build
SKU: PGI-0019053 -
3D Accessories, Filaments
WANHAO White PLA 1.75 mm 1 KG Filament for 3D printer – Premium Quality
Ask for Latest offers/availability : https://bit.ly/3odC4Md
- High-quality starting material
- Diameter tolerances of ± 0.1mm checked with laser monitor
- Smooth surface with even rounding
- Lower melting temperature
- Good flow properties
- Little odor development
- Less risk of clogging the nozzle, compared to ABS
- Compatible with almost all 1.75mm FDM printers
- No heating bed necessary
- High quality means less waste
- Easy to use
- No heating bed necessary
SKU: PGI-0018945 -
Generic Ultrasonic Sensor
Waterproof Ultrasonic Obstacle Sensor, Reversing Radar Sensor with Separate Probe
Generic Ultrasonic SensorWaterproof Ultrasonic Obstacle Sensor, Reversing Radar Sensor with Separate Probe
Ask for latest offers/availability : https://bit.ly/3cOJFbt
- Integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions
- Small size, easy to use
- Operating Voltage: 5 V
- Sonar Sensing Range: 25-450 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 KHz
SKU: PGI-0084338 -
-
Raspberry Pi Displays
Waveshare 10.1 Inch Capacitive HDMI LCD Display (B) with Case 1280×800
Ask for Latest offers/availability : https://bit.ly/395CTxY
- 10.1-inch LCD display.
- 1200 x 800 screen resolution and IPS display panel.
- 170º viewing angle
- Toughened glass capacitive touch panel, 6H hardness.
- HDMI interface for displaying, USB interface for touch control.
- Supports 5-level backlight adjustment.
- Raspberry Pi and Windows device & system support.
SKU: PGI-00938877 -
Servo Motor Driver
Waveshare 12-bit I2C 16-Channel Servo Driver
Ask for Latest offers/availability : https://bit.ly/3htmYxZ
- Power supply: 5V (POWER connector) OR 6V~12V (VIN terminal)
- Servo voltage: 5V
- Logic voltage: 3.3V
- Driver: PCA9685
- Control interface: I2C
- Dimension: 65mm x 36mm
- Mounting hole size: 3.0mm
SKU: PGI-001063370 -
Load / Pressure / Force / Flex Sensor
Weighing Load Cell Sensor 1Kg for Electronic Kitchen Scale YZC-131 With Wires
Load / Pressure / Force / Flex SensorWeighing Load Cell Sensor 1Kg for Electronic Kitchen Scale YZC-131 With Wires
Ask for latest offers/availability : https://bit.ly/2W8PU38
- Weighing Range: 0 ~ 1 kg.
- Rated Output: 1.0 ± 0.1mV / V.
- Non Linear Output: ± 0.03% F.S.
- Input Impedance: 1066 ± 10% Ω.
- Output Impedance: 1000 ± 10% Ω.
- Insulation Resistance: 2000 MΩ.
SKU: PGI-0028623 -
Load / Pressure / Force / Flex Sensor
Weighing Load Cell Sensor 3KG For Electronic Kitchen Scale YZC-131 With Wires
Load / Pressure / Force / Flex SensorWeighing Load Cell Sensor 3KG For Electronic Kitchen Scale YZC-131 With Wires
Ask for latest offers/availability : https://bit.ly/2S9ojgH
- This straight bar load cell (sometimes called a strain gauge) can translate up to 5 kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar.
SKU: PGI-0028643 -
Load / Pressure / Force / Flex Sensor
Weighing Load Cell Sensor 5kg YZC-131 With Wires
Ask for latest offers/availability : https://bit.ly/2W1hE9M
- Model: YZC-131A
- Dimensions: 75 x 12.7 x 12.7 mm (L x W x H)
- Range: 5 kg
- Cable Length: 18 cm
- Fitting ScrewHole Size: M3
- Rated output: 1.0 0.1mV / V
- Nonlinear: 0.05% F.S
- Hysteresis: 0.0% F.S
- Repeatability: 0.05% F.S
SKU: PGI-0028646 -
Esp Wifi Module
WeMos D1 ESP Wroom 02 Board ESP8266 Mini-WiFi Nodemcu Module 18650 Battery
Ask for latest offers/availability : https://bit.ly/3aNcALi
- Operation and charging are possible at the same time.
- 18650 charging circuit including the 5V boosting circuit with TP5410.
- Overcharge protection, over-discharge protection built in.
- One AD inputs.
- Micro USB inputs.
- The five buttons are controlled by FLATH, RSET, D5, D6, and D7 respectively.
- The 5 Digital pins can configure the write/read/interrupt/PWM/I2C/one-wire supported separately.
SKU: n/a -
Esp Wifi Module
WEMOS ESP8266 D1 Pro mini-16 m External Antenna Connector
Ask for latest offers/availability : https://bit.ly/2xfIHWk
- 11 digital input/output pins
- Interrupt/PWM/I2C/one-wire
- 1 analog input(3.2V max input)
- 16M bytes(128M bit) Flash
- External antenna connector
- Built-in ceramic antenna
- New CP2104 USB-TO-UART IC
SKU: n/a -
Esp Wifi Module
WeMos ESP8266 D1 R2 V2.1.0 WiFi Development Board
Ask for latest offers/availability : https://bit.ly/2yNCrpo
- Microcontroller: ESP8266EX
- Operating Voltage: 3.3V
- Digital I/O Pins: 11 (all I/O pins have interrupt/PWM/I2C/one-wire capability, except for D0)
- Analog Input Pins: 1
- Flash Memory: 4MB
- On-Board Switching Power Supply:
- Input Voltage Range: 9V to 12V
- Output: 5V at 1A Max
SKU: n/a -
-
Hardware & Tools, Prayog Blaster
White Hot Melt Glue Stick Strips
Ask for Latest offers/availability : https://bit.ly/2Ot7HSi
- Quick-stick, high-strength, anti-aging, non-toxic, good thermal stability, toughness.
- Bending resistance, not aging, good adhesion, strong adsorption,Transparent, no smell, the surface is smooth.
- Used in plastics, metal, wood, paper, toys, electronics, furniture, leather, handicrafts, shoe materials.
SKU: PGI-0052 -
Environmental Sensors
Wind Speed Sensor Voltage Type(0-5V) Anemometer Kit (Waterproof & Industrial)
Ask for Latest offer / Availability : https://bit.ly/34JYAAH
- High hardness, Corrosion protection.
- Waterproofness and High precision.
- The mode of its output signal：0-5V(Voltage signal).
- supply voltage: DC 9-24V.
- Power consumption：Voltage MAX≤0.3W.
- Start wind speed：0.4-0.8m/s.
SKU: PGI-0028669 -
Gas Sensor
Winsen MQ-2- Smoke Sensor
Ask for latest offers/availability : https://bit.ly/3sv96Hi
- Operating Voltage is +5V
- Can be used to Measure or detect LPG, Alcohol, Propane, Hydrogen, CO, and even methane
- Can be used as a digital or analog sensor
- Long life and low cost
- Simple drive circuit
SKU: PGI-00938342 -
Solar Panel
World’s Smallest Solar Powered Car
Ask for latest offers/availability : https://bit.ly/3cUO6lb
- No Battery Required.
- Powered by Solar energy and the Car can run.
- Ultra small solar powered moving car
- Great toy and education tool for children.
- Dimensions: 32 x 22 x 14 (LxWxH) mm.
- Weight: 5 gm.
- Very small in Size
SKU: n/a -
Plastic Gear
Worm Gear 18 mm Dia 30mm Length 6mm ID Yellow Plastic Good Quality
Ask for Latest offer / Availability : https://bit.ly/3wUSZVk
- Outer Diameter: 19mm
- Gear Mod: Mod 1.6
- Inner Bore: 6mm, comes with set screw to securely attach the gear to the shaft
- Application: Perfect for use in science projects, robotics, etc
SKU: PGI-00182 -
Wearable Electronics
WS2812 LilyPad RGB LED Module for Arduino
Ask for latest offers/availability : https://bit.ly/3bV03Gj
- LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!
SKU: PGI-0052069 -
Audio Module
WT588D-16P Voice Sound Audio Player Module DC 2.8V-5.5V for Arduino
Ask for latest offers/availability : https://bit.ly/2zsr32F
- Module package (with FLASH memory and peripheral circuits) have DIP16, DIP28, chip packaging has DIP18, SSOP20, and LQFP32 form.
- Built 13Bit/DA converter, and 12Bit/PWM output.
- PWM output can directly drive 0.5W/8Ω speakers, push-pull current abundant support DAC / PWM output of two ways.
- Support for loading WAV audio formats.
- USB download mode, support for online download / offline download.
SKU: n/a
