Shop
Showing 1729–1752 of 1946 results
-
-
-
-
-
-
Development Board
ST Link V2 Programmer For STM8 and STM32
Ask for latest offers/availability : https://bit.ly/3tS1Llh
- PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable!
- Interface definition directly marked on the shell, clear, convenient and practical!
- 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V
- Shell characters using laser engraving, never fade off! Permanent clarity!
- 500MA internal resettable fuse, complete protection of your expensive computer motherboard!
- SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
- SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
SKU: PGI-0083581 -
Development Board
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32
Ask for latest offers/availability : https://bit.ly/3cmx4P6
- 5V power supplied by a USB connector
- USB 2.0 full speed compatible interface
- USB standard A to mini B cable
- 1.65V to 5.5V application voltage supported on SWIM interface
- SWIM low speed and high-speed modes supported
SKU: PGI-00304904 -
Wearable Electronics
Stainless Steel 1m Conductive Thread Wire for Wearable Lilypad (Pack of 5)
Ask for latest offers/availability : https://bit.ly/2Zr3Sk5
- Material: 12UM Stainless steel fiber
- Gram Weight: 0.2458g/m
- Strength: 2.8KGF.
- Length: 1m.
- Diameter(mm): 0.12.
- Resistance (Ω/m) : 27.
- 12m per spool (on plastic spools).
SKU: n/a -
-
Hardware & Tools
Standard 60 Watt Corded Glue Gun with 2 Glue Sticks
Ask for Latest offer / Availability : https://bit.ly/3uOSE69
- Comes with an On/Off Switch
- Feed Type Trigger-fed Gun
- Rated Power: 60 W
- Heating Up Time: 5 min
- Cord Length: 1 Mtr.
- Aluminum Tip
- Replaceable Cartridge(Glue Sticks)
- Specific Uses of the Product Wood, Plastics, Textiles, Cardboard, Ceramics, Leather, etc
SKU: n/a -
Hardware & Tools, Mechanical, Prayog Blaster
Standard Temperature 40 Watt Hot Melt Glue Gun with On/Off Switch
Hardware & Tools, Mechanical, Prayog BlasterStandard Temperature 40 Watt Hot Melt Glue Gun with On/Off Switch
Ask for Latest offer / Availability : https://bit.ly/3kBUuCx
- Voltage: 110-220V
- Power consumption: 40W
- Melt Temperature(°C): 190 (± 10)
- Use Glue Stick Size: 11MM
- Trigger-freed mechanism controls glue flow
- 40 watts Black Glue Gun with Instruction on the Back Side.
- Thermostat, Speed Melt (Internal PTC Heating Element).
- Hot Melt Glue Gun Solid Body, The use of Advanced Engineering Plastic Manufacturing.
SKU: PGI-0031665 -
Microcontrollers
STM32F103C8T6 LQFP-48 ARM Microcontroller-MCU
Ask for latest offers/availability : https://bit.ly/3rt97d7
- Operating voltage range from 2V to 3.6V
- 64Kbytes of flash memory
- 20Kbytes of SRAM
- CRC calculation unit, 96bit unique ID
- Two 12bit, 1µs A/D converter (up to 10 channels)
- 7 channel DMA controller, 3 general purpose timer and 1 advanced control timer
- 37 fast I/O ports
- Serial wire debug (SWD) and JTAG interfaces
SKU: n/a -
Microcontrollers
STM32F103C8T6 Minimum System Board Microcomputer STM32 ARM Core Board
Ask for latest offers/availability : https://bit.ly/3lScp8I
- 100% Brand new and high quality STM32 Board
- Model: STM32F103C8T6.
- Core: ARM 32 Cortex-M3 CPU.
- Debug mode: SWD.
- 72MHz work frequency.
- 64K flash memory, 20K SRAM.
- 2.0-3.6V power, I/O.
- Color: Blac
SKU: PGI-00835832 -
Development Board
STM32F103C8T6 Minimum System Board Microcomputer STM32 ARM Core Board
Ask for latest offers/availability : https://bit.ly/3lQ3uEX
- 100% Brand new and high quality STM32 Board
- Model: STM32F103C8T6.
- Core: ARM 32 Cortex-M3 CPU.
- Debug mode: SWD.
- 72MHz work frequency.
- 64K flash memory, 20K SRAM.
- 2.0-3.6V power, I/O.
SKU: PGI-0031258 -
Microcontrollers
STM32F411CEU6 Minimum System Board Microcomputer STM32 ARM Core Board
Ask for latest offers/availability : https://bit.ly/3sqZDAq
- 100% Brand new and high-quality STM32 Board
- Model: STM32F411CEU6
- Core: ARM 32 Cortex-M4 CPU.
- Debug mode: SWD.
- 72MHz work frequency.
- 512K flash memory, 128K SRAM.
SKU: PGI-00835837 -
Quad Copter & Multi Rotors
Storm32 Bgc V1.1 3-axis Gimbal Controller Set
Ask for Latest offers/availability : https://bit.ly/2YnU1gj
- Model: Storm32
- Board version: v1.1
- Board color: blue
- Motor drivers in DFN packages: yes
- On-board MPU: yes
- Onboard Bluetooth module: no
- Supply voltage: 6 – 18 V or 2 – 4S
- Motor current: max. 1.5 A per motor
SKU: n/a -
-
Battery and Charger
Sunca 4V 1Ah Sealed Lead-Acid Rechargeable Battery
Ask for Latest offers/availability : https://bit.ly/39mCQ0Y
- Strong Abs And Sealed Maintenance Free.
- Sealed Construction And Leak Proof.
- Safety Valve Regulated System.
- Deep Discharge Recovery.
- Wide Operating Temperature Range
- 100% Brand New
SKU: n/a -
-
Temperature and Humidity Sensor
Surface thermocouple K type high temperature resistance Probe
Ask for latest offers/availability : https://bit.ly/2KIpZKl
- Cable length: 1M
- Temperature range: -20 ~ 500 ° (less)
- Color: Yellow
- Accuracy : ±2.5%/0.75%
- Material: Plastic
- Interface Type: flat plug-in
- Interface Length: 12.5MM
SKU: PGI-00699618
