Shop
Showing 1633–1656 of 1946 results
-
Raspberry Pi Accessories
Set of Aluminum Heatsink for Raspberry Pi (Large and Small)
Ask for Latest offer / Availability : https://bit.ly/3hnwVNS
- Dimensions
- Large Heatsink: 14 x 14 x 7 (LxWxH) mm
- Small Heatsink: 9 x 9 x 5 (LxWxH) mm
- Material: aluminum
- Color: white
- Teeth Number
- Large Heatsink: 6 Teeth
- Small Heatsink: 5 Teeth
SKU: PGI-0053259 - Dimensions
-
IC's
SG3524 Regulating Pulse Width Modulator (pack of 10)
Ask for Latest offer / Availability : https://bit.ly/3qAgH5U
- Contains the Necessary Control Circuit for a Regulator Power Supply Inverter/Regulator
- Complete PWM Power Control Circuitry
- Single Ended or Push-Pull Outputs
- Line and Load Regulator of 0.2%
- 1% Maximum Temperature Variation
SKU: n/a -
Servo Motor
SG90 9G High Quality Servo Motor 180 degree rotation
Ask for Latest offers/availability :https://bit.ly/3nlFWKD
- Dimension: 22mm x 11.5mm x 22.5mm
- Net Weight: 9 grams
- Operating speed: 0.12second/ 60degree ( 4.8V no load)
- Stall Torque (4.8V): 17.5oz /in (1kg/cm)
- Temperature range: -30 to +60
- Dead band width: 7usec
- Operating voltage: 3.0V~7.2V
- Fit for ALL kind of R/C Toys
- Coreless motor
- 3 pole wure
- All nylon gear
- Dual ball bearing
- Connector wire length 150mm
SKU: n/a -
Prayog Blaster
SG90 Servo Motor, PIR Sensor and Ultrasonic Sensor
Ask for Latest offers/availability : https://bit.ly/2JKAxLM
- This mini sensor kit contains: 1 x SG90 Servo motor + 1 x Ultrasonic Sensor+ 1 x PIR Sensor.
- The ultrasonic sensor included in the kit is a HC-SR04 ultrasonic sensor which is used to measure the distance to an object.
- The PIR infrared sensor module included in the sensor kit is designed for high senitivty, high reliability, low power consumption, low voltage operation mode.
- The servo motor is equipped with carbon fibre gears that makes it lightweight and produces a torque of 1.8 kg-cm.
- This sensor kit is best suited for development boards compatible with arduino , Raspberry Pi and other microcontrollers.
SKU: PGI-0075 -
-
Biometric/ECG/EMG/Sensor
SHIELD-EKG-EMG-PASSIVE
Ask for latest offers/availability : https://bit.ly/3bAE5Je
- The Olimex Shield-EKG-EMG-PA passive electrode pack has three electrodes suitable for use with the EKG/EMG shield (73-0274) labeled right arm, left arm and DRL. DRL stands for Driven Right Leg and it is used to improve common mode rejection.
SKU: PGI-006327 -
Water Flow And Level Sensor
Side Mounted Small Float Level Control Switch Plastic Float Switch 55mm
Ask for latest offers/availability : https://bit.ly/2VD23ho
- Rhodium reed switch
- Special handling reed switches in high temperature
- Overall performance and reliable float switch
- Long-lasting life: Up to 100 million times
- Switch Length: 55 mm
- Cable Length: 300 mm
SKU: PGI-00610757 -
Johnson Geared Motor, Prayog Blaster
Side Shaft 300RPM 12V Johnson Gear DC Motor/8kg High Torque Motor
Johnson Geared Motor, Prayog BlasterSide Shaft 300RPM 12V Johnson Gear DC Motor/8kg High Torque Motor
Ask for Latest offers/availability : https://bit.ly/3t3KODO
- Specially designed for robotic applications
- Rpm – 300, stall torque 8 kgcm
- No-load current = 800 ma(max), load current = 9 a(max)
SKU: n/a -
Rfid Card, Tags & Readers
Silicone Wristband RFID Bracelet Tag For Access Control Swimming Pool And Marathon
Rfid Card, Tags & ReadersSilicone Wristband RFID Bracelet Tag For Access Control Swimming Pool And Marathon
Ask for latest offers/availability : https://bit.ly/2VQ8lJI
- Reading range: 2 – 10 cm.
- Material: 100% SGS approval silicone, PPS high-temperature materials RFID Laundry Tag
- Size (Diameter): 100 mm.
- Stretchable: Above 150 mm.
- Colour: Red.
SKU: PGI-00456224 -
Gsm/Gprs
SIM7600EI 4G LTE High-Speed Modem GPS/GNSS IoT board
Ask for latest offers/availability : https://bit.ly/3ffVnO9
- Multi-band LTE-FDD/LTE-TDD/HSPA+/UMTS/EDGE/GPRS/GSM module solution in LCC type
- Supports LTE CAT1 up to 10Mbps for downlink & 5Mbps for uplink data transfer
- Designed in the compact and unified form factor
- Compatible with SIMCom HSPA+ SIM5360 module/LTE CAT3 SIM7100 and LTE CAT4 SIM7600E-H module
SKU: n/a -
Gsm/Gprs, IoT and Wireless
SIM7600EI 4G LTE High-Speed Modem GPS/GNSS IoT board Raspberry Pi Compatible
Gsm/Gprs, IoT and WirelessSIM7600EI 4G LTE High-Speed Modem GPS/GNSS IoT board Raspberry Pi Compatible
Ask for Latest offer / Availability : https://bit.ly/3xlBUV6
- Multi-band LTE-FDD/LTE-TDD/HSPA+/UMTS/EDGE/GPRS/GSM module solution in LCC type
- Supports LTE CAT1 up to 10Mbps for downlink & 5Mbps for uplink data transfer
- Designed in the compact and unified form factor
- Compatible with SIMCom HSPA+ SIM5360 module/LTE CAT3 SIM7100 and LTE CAT4 SIM7600E-H module
SKU: PGI-00336554 -
Arduino Modules
SIM800A Quad Band GSM/GPRS Module with RS232 Interface
- Quad-band 850/900/1800/1900MHz.
- GPRS class 2/10.
- Input Voltage : 9V-12V DC.
- Control via AT commands (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT command set).
- Configurable baud rate.
- Built-in SIM Card holder.
- Built-in Network Status LED.
SKU: PGI-0034205 -
Gsm/Gprs
SIM800A Quad Band GSM/GPRS Module with RS232 Interface
Ask for latest offers/availability : https://bit.ly/35vJtLO
- Quad-band 850/900/1800/1900MHz.
- GPRS class 2/10.
- Input Voltage : 9V-12V DC.
- Control via AT commands (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT command set).
- Configurable baud rate.
- Built-in SIM Card holder.
- Built-in Network Status LED.
SKU: n/a -
-
Gsm/Gprs
SIM800L GPRS GSM Module Core Board Quad-band TTL Serial Port with the antenna
Ask for latest offers/availability : https://bit.ly/2z7ibPw
- TTL serial port for serial port, you can link directly to the micro-controller.
- Don’t need MAX232.
- Power module automatically boots, homing network.
- Onboard signal lights all the way.
- It flashes slowly when there is a signal, it flashes quickly when there is no signal.
SKU: n/a -
Gsm/Gprs
SIM800L V2.0 5V Wireless GSM GPRS MODULE Quad-Band with Antenna
Ask for latest offers/availability : https://bit.ly/3b5fE5z
- Network support: Quad-Band 850/900/1800/1900 MHz – works on GSM networks in all countries across the world.
- TTL serial interface compatible with 3.3V and 5V MCU
- the small size is suitable for all kinds of sleeve belt type and embedded.
- Power supply: 5 -20 V.
- Power Interface: 2.54 mm Pin header or MICRO USB interface.
SKU: n/a -
Gsm/Gprs
SIM808 GSM/GPRS/GPS Bluetooth Compatible Development Board With GPS Antenna (Arduino and Raspberry Pi Compatible)
Gsm/GprsSIM808 GSM/GPRS/GPS Bluetooth Compatible Development Board With GPS Antenna (Arduino and Raspberry Pi Compatible)
Ask for latest offers/availability : https://bit.ly/3fecIHb
- 22 tracking/66 acquisition channel.
- GPS L1 C/A code.
- Precision: Tracking: -165dBm.
- Cold start: -148dBm.
- Supports Quad-band 850/900/1800/1900MHz.
- Accuracy: ~2.5m.
- GPRS multi-slot class 12/10.
SKU: n/a
