PIC16F88 – Flash 8-pin 1kb 20MHz Microcontroller.
Package includes :
1 x PIC16F88 Microcontroller
-3%
Microcontrollers
PIC16F88 Microcontroller
- Special Microcontroller Features
- 100,000 erase/write cycles Enhanced Flash program memory typical
- 1,000,000 typical erase/write cycles EEPROM data memory typical
- Low-Voltage Programming
- In-circuit Debugging via two pins
- Programmable period from 1 ms to 268s
- Wide operating voltage range: 2.0V to 5.5V
- Low Features
- Primary Run: RC Oscillator, 76 µA, 1 MHz, 2V
- RC_RUn: 7 µA, 31.25 kHz, 2V
- TImer1 Oscillator: 1.8 µA, 32kHz, 2V
- Watchdog Timer: 2.2 µA, 2V
₹164.00 ₹169.00 incl. GST
Peripheral Features
10-bit, 7-channel Analog-to-Digital Converter
Synchronous Serial Port (SSP) with SPI and I²C
RS232 operaton using internal oscillator (no external crystal required)
Programmable on-chip vvoltage reference
Oscillators
Three Crysal modes: LP, XT, HS (up to 20 MHz)
Two External RC modes
ECIO (up to 20 MHz)
8 user-selectable frequencies
Based on 0 reviews
Be the first to review “PIC16F88 Microcontroller”
Related products
-
Microcontrollers
Atmega48PA – PU Microcontroller
- High Performance, Low Power AVR® 8-Bit Microcontroller
- Advanced RISC Architecture
- 131 Powerful Instructions – Most Single Clock Cycle Execution
- 32 x 8 General Purpose Working Registers
- Fully Static Operation
- Up to 20 MIPS Throughput at 20 MHz
- On-chip 2-cycle Multiplier
- • High Endurance Non-volatile Memory Segments – 4K Bytes of In-System Self-Programmable Flash progam memory
SKU: n/a -
Microcontrollers
AT24C512C-SSHD-B – EEPROM, SERIAL, 512K (64KX8), 8SOIC
- Low-voltage and standard-voltage operation
- M for VCC from 1.7V to 3.6V
- D for VCC from 2.5V to 5.5V
- Internally organized 65,536 x 8
- Two-wire serial interface
- Schmitt triggers, filtered inputs for noise suppression
- Bidirectional data transfer protocol
SKU: n/a -
Microcontrollers
PIC16F77 – Flash 8kbyte 8MHz Microcontroller [Microchip]
- Special Microcontroller Features
- Fail-Safe Clock Monitor
- Power-On Reset
- Power-up Timer (PWRT) and Oscillator Start-Up Timer (OST)
- Two-Speed Start-Up mode
- Programmable Code Protection
- Power-Saving Sleeping Mode
- Peripheral Features
- Two 8-bit timer/counter with Prescalar
- One 16-bit timer/counter
- High source/sink current: 25mA
- Master Synchroonous Serial Port (MSSP)
- Parallel Slave Port (PSP): 40/44 pin-device only
- Low-Power Features
- Primary Run(XT, RC, Oscillator, 76 µA, 1MHz, 2V)
- RC_RUN (7µA, 31.25kHz, 2V)
- Timer1 Oscillator (1.8 µA, 32kHz, 2V)
- Wachtdog Timer(0.7 µA, 2V)
- Two-Speed Oscillator Start-up
- Analog Features
- 10-bit, up to 14-channel Analog-to-Digital Converter
- Dual Analog Comparators
- Programmable Low-Current Brown-out Reset (NOR) Circuitry
- Programmable Low-Voltage Detect (LVD)
- Oscillators
- Three Crystal modes: LP, XT, HS (up to 20 MHz)
- Two External RC modes
- ECIO (up to 20 MHz)
- 8 user-selectable frequencies
SKU: n/a -
Microcontrollers
PIC16F628A Microcontroller
- High-Performance RISC CPU
- Only 35 single word instructions to learn
- All instructions are 1µs (@4MHz) except for program branches
- Operating speed: DC – 20MHz clock input
- 2 kBytes Flash Program Memory
- 224 Byte RAM Data Memory
- 128 Byte EEPROM Data Memory
- In-circuit serial programming
- Peripheral Features
- Universal Synchronous/Asynchronous Receiver/Transmitter (USART)
- Two 8-bit timer/counter(TMR0,TMR2) with 8-bit programmable prescalar
- One 16 bit timer/counter
- High current source/sink for direct LED drive
- Watchdog Timer (WDT) with separate RC oscillator
- Two Analog Comparators
- Capture/Compare PWM (CCP) Module
- 16 Bytes of common RAM
- Special Microcontroller Features
SKU: n/a
There are no reviews yet.