AT89C51- 8 bit Microcontroller with 4k Byte Flash.
Package includes :
1 x AT89C51 – 8 bit Microcontroller
-6%
Microcontrollers
AT89C51 – 8 bit Microcontroller
- Compatible with MCS-51 Products
- 4K Bytes of In-System Reprogrammable Flash Memory
- Fully Static Operation: 0 Hz to 24 MHz
- Three-level Program Memory Lock
- 128 x 8-bit Internal RAM
- 32 Programmable I/O Lines
- Two 16-bit Timer/Counters
- Six Interrupt Sources
- Programmable Serial Channel
- Low-power Idle and Power-down Modes
- 40-pin DIP
₹118.00 ₹125.00 incl. GST
Two 16-bit Timer/Counters
Six Interrupt Sources
Programmable Serial Channel
Low-power Idle and Power-down Modes
40-pin DIP
Based on 0 reviews
Be the first to review “AT89C51 – 8 bit Microcontroller”
Related products
-
Microcontrollers
Atmega8L-8PU Microcontroller
- 28-pin AVR Microcontroller
- Flash Program Memory: 8 kbytes
- EEPROM Data Memory: 512 bytes
- SRAM Data Memory: 1 kbytes
- I/O Pins: 23
- Timers: Two 8-bit / One 16-bit
- A/D Converter: 10-bit Six Channel
- PWM: Three Channels
- RTC: Yes with Separate Oscillator
- MSSP: SPI and I²C Master and Slave Support
- USART: Yes
- External Oscillator: up to 8MHz
SKU: n/a -
Microcontrollers
AT24C512C-SSHD-B – EEPROM, SERIAL, 512K (64KX8), 8SOIC
- Low-voltage and standard-voltage operation
- M for VCC from 1.7V to 3.6V
- D for VCC from 2.5V to 5.5V
- Internally organized 65,536 x 8
- Two-wire serial interface
- Schmitt triggers, filtered inputs for noise suppression
- Bidirectional data transfer protocol
SKU: n/a -
Microcontrollers
Atmega168A – 20PU Microcontroller
- High performance, low power Atmel® AVR® 8-bit microcontroller
- Advanced RISC architecture
- 131 powerful instructions – most single clock cycle execution
- 32 × 8 general purpose working registers
- Fully static operation
- Up to 20 MIPS throughput at 20MHz
- On-chip 2-cycle multiplier
SKU: n/a -
Microcontrollers
PIC16F84A Microcontroller
- Only 35 single word instructions to learn
- All instructions single-cycle except for program branches which are two-cycle
- Operating speed: DC – 20 MHz clock input DC – 200 ns instruction cycle
- 1024 words of program memory
- 68 bytes of Data RAM
- 64 bytes of Data EEPROM
- 14-bit wide instruction words
- 8-bit wide data bytes
- 15 Special Function Hardware registers
SKU: n/a
There are no reviews yet.