Motors | Drivers | Actuators Categories
Showing 73–96 of 162 results
-
Servo Motor
Metal Gear 15 KG High Torque Servo Motor For Robotics(MG996R)
Ask for Latest offers/availability : https://bit.ly/3jY8KHa
- Net Weight: Approx 62g
Dimension: Approx 40.5 x 20.2 x 38mm
Output gear:25T - Working frequence: 1520μs / 330hz
- Stall torque:17.25kg/cm（4.8v); 20.32kg/cm(6.0v)
Operating speed: 0.18 sec/60° (4.8v); 0.16sec/60degree (6.0v)
Control Angle: 180° degree
Operating voltage: 4.8-6.0v
Gear Type: All Metal gears
Bearing: 2BB (2 ball bearings)
Temperature range: -10- 50deg
Dead band width: 2us
servo wire length: 25cm / 9.84inch
Servo Plug: JR (Fits JR and Futaba)
SKU: PGI-001070680 - Net Weight: Approx 62g
-
Arduino Accessories, Electronic Components & IC's, Motors | Drivers | Actuators Categories
Mini Vibration Vibrating Electric Toys Motor DC 1.5-6V 14000RPM for Arduino
Arduino Accessories, Electronic Components & IC's, Motors | Drivers | Actuators CategoriesMini Vibration Vibrating Electric Toys Motor DC 1.5-6V 14000RPM for Arduino
Ask for Latest offer / Availability : https://bit.ly/3iP6Bwj
- Motor Size: 15x11x19mm; Vibrator Size: 7 x 5mm (mounted eccentrically on the shaft)
- Voltage: 1.5 – 6v; Speed: 14000 RPM
- Typical Application: RC toys,Game Controller, Vibrating toothbrush, Electrical Toys, Game Machine, Game Handle, Game Controller, Electric Appliances, Massager Device.
SKU: n/a -
STEPPER MOTOR AND DRIVERS
MKS SBASE V1.3 32-bit Open Source Smoothieboard
Ask for Latest offers/availability : https://bit.ly/3iTsf30
- 32bit 100M Cortex-M3 MCU-LPC 1768
- High-performance
- Support highly modular open source firmware Smoothieware
- Easy for secondary development
- Support network function, then proceed remote control via IE Explorer.
SKU: PGI-00766364 -
STEPPER MOTOR AND DRIVERS
MKS-LV8729-OC 1.5A Ultra Quiet Stepper Motor Driver for 3D Printers and CNC
STEPPER MOTOR AND DRIVERSMKS-LV8729-OC 1.5A Ultra Quiet Stepper Motor Driver for 3D Printers and CNC
Ask for Latest offers/availability : https://bit.ly/3iW6kIv
- High-speed optocoupler, high-speed without losing a step
- LV8729 chip, with over-current protection circuit, the maximum support 128 segments
- Automatic half-flow function
- A variety of input methods to meet a variety of interface needs
- The use of increased heat sink, good heat dissipation
SKU: PGI-00815856 -
N20 Motor without Encoder
Mounting Bracket for N20 Micro Gear motors-2pcs
Ask for Latest offer / Availability : https://bit.ly/2USH6kK
- Height: 11mm
- Width : 25mm
- Material: high-quality plastic
SKU: PGI-0044306 -
Geared Motor, Hardware & Tools, Prayog Blaster, Tyres & Wheels
Mounting Clamp for BO Motor (Pack of 4)
Geared Motor, Hardware & Tools, Prayog Blaster, Tyres & WheelsMounting Clamp for BO Motor (Pack of 4)
Ask for Latest offers/availability : https://bit.ly/3uXgOfi
- Material: MS steel.
- Thickness: 1mm.
- Mounting Hole: 3mm.
SKU: PGI-00608141 -
N20 Motor without Encoder
N20 12V 140RPM Micro Metal Gear Motor With Encoder
Ask for Latest offer / Availability : https://bit.ly/3esWmvP
- Encoder Test Wire Length: 140mm.
- Wheel Dia.: 43 mm.
- Rated Voltage: DC 12V.
- Output Speed: 120RPM.
- Milling Edge: 0.5 mm.
- Output Shaft Size: 3 x 10mm.
- Output Shaft type: D type.
SKU: PGI-00475625 -
Encoder
N20 3V 150RPM Micro Metal Gear Motor With Encoder
Ask for Latest offer / Availability : https://bit.ly/3axhNcF
- Encoder Test Wire Length: 140mm.
- Wheel Dia.: 43 mm.
- Rated Voltage: DC 3V.
- Output Speed: 150RPM.
- Milling Edge: 0.5 mm.
- Output Shaft Size: 3 x 10mm.
- Output Shaft type: D type.
SKU: PGI-00476817 -
N20 Motor without Encoder
N20 3V 35RPM Micro Metal Gear Motor With Encoder
Ask for Latest offer / Availability : https://bit.ly/2Ucwjlu
- Encoder Test Wire Length: 140mm.
- Wheel Dia.: 43 mm.
- Rated Voltage: DC 3V.
- Output Speed: 35RPM.
- Milling Edge: 0.5 mm.
- Output Shaft Size: 3 x 10mm.
- Output Shaft type: D type.
SKU: PGI-00476766 -
N20 Motor without Encoder
N20 3V 75RPM Micro Metal Gear Motor With Encoder
Ask for Latest offer / Availability : https://bit.ly/3hP1wEg
- Encoder Test Wire Length: 140mm.
- Wheel Dia.: 43 mm.
- Rated Voltage: DC 3V.
- Output Speed: 75RPM.
- Milling Edge: 0.5 mm.
- Output Shaft Size: 3 x 10mm.
- Output Shaft type: D type.
SKU: PGI-00467815 -
N20 Motor without Encoder
N20 6V 150RPM Micro Metal Gear Motor With Encoder
Ask for Latest offer / Availability : https://bit.ly/2UQa9p5
- Encoder Test Wire Length: 140mm.
- Wheel Dia.: 43 mm.
- Rated Voltage: DC 6V.
- Output Speed: 150RPM.
- Milling Edge: 0.5 mm.
- Output Shaft Size: 3 x 10mm.
- Output Shaft type: D type.
SKU: PGI-00476675 -
N20 Motor without Encoder
N20 6V 200RPM Micro Metal Gear Motor With Encoder
Ask for Latest offer / Availability : https://bit.ly/2VF6jzu
- Encoder Test Wire Length: 140mm.
- Wheel Dia.: 43 mm.
- Rated Voltage: DC 6V.
- Output Speed: 200RPM.
- Milling Edge: 0.5 mm.
- Output Shaft Size: 3 x 10mm.
- Output Shaft type: D type.
SKU: PGI-00476696 -
N20 Motor without Encoder
N20 6V 50RPM Micro Metal Gear Motor With Encoder
Ask for Latest offer / Availability : https://bit.ly/3klcKlH
- Encoder Test Wire Length: 140mm.
- Rated Voltage: DC 6V.
- Output Speed: 50RPM.
- Milling Edge: 0.5 mm.
- Output Shaft Size: 3 x 10mm.
- Output Shaft type: D type.
SKU: PGI-00476547 -
N20 Motor without Encoder
N20-12V-300 Rpm Micro Metal Gear Motor
Ask for Latest offer / Availability : https://bit.ly/3iAr5s7
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: PGI-0075776 -
N20 Motor without Encoder
N20-3V-15 RPM Micro Metal Gear-box DC Motor
Ask for Latest offer / Availability : https://bit.ly/2Tl8tDM
- This is a DC Mini Metal Gear Motor, ideal for making robots.
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: PGI-00475044 -
N20 Motor without Encoder
N20-3V-200 RPM Micro Metal Gear-box DC Motor
Ask for Latest offer / Availability : https://bit.ly/3hHpqBu
- This is a DC Mini Metal Gear Motor, ideal for making robots.
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: PGI-00475212 -
N20 Motor without Encoder
N20-3V-300 RPM Micro Metal Gear-box DC Motor
Ask for Latest offer / Availability : https://bit.ly/3esLzBy
- This is a DC Mini Metal Gear Motor, ideal for making robots.
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: PGI-00475324 -
N20 Motor without Encoder
N20-6V-200 RPM Micro Metal Gear-box DC Motor
Ask for Latest offer / Availability : https://bit.ly/3xI5a8u
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: PGI-0075011 -
N20 Motor without Encoder
N20-6V-30 RPM Micro Metal Gear-box DC Motor
Ask for Latest offer / Availability : https://bit.ly/36Dazlt
- This is a DC Mini Metal Gear Motor, ideal for making robots.
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: PGI-00470837 -
N20 Motor without Encoder
N20-6V-300 Rpm Micro Metal Gear Motor
Ask for Latest offer / Availability : https://bit.ly/3z9MaAi
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: PGI-0075800 -
N20 Motor without Encoder
N20-6V-400 Rpm Micro Metal Gear Motor
Ask for Latest offer / Availability : https://bit.ly/3ifeN82
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: PGI-0075813 -
N20 Motor without Encoder
N20-6V-60 RPM Micro Metal Gear-box DC Motor
Ask for Latest offer / Availability : https://bit.ly/36GfJgw
- This is a DC Mini Metal Gear Motor, ideal for making robots.
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: PGI-0075027 -
Stepper Motor
NEMA 23 30.61 kg-cm Hybrid Stepper Motor
Ask for Latest offer / Availability : https://bit.ly/30mJ6ER
- Step Angle Step Angle: 1.8 °
- Current: 4 A/Phase
- Holding Torque: 306 N-cm
- Detent torque: 6.8 N.cm (Maximum)
- Lead Wires: 4
- Shaft diameter: 8 mm (D-Type)
SKU: PGI-006735 -
Orange High Torque Motors
Orang High Torque DC Gear Motor 24V-200KG.1CM-180K
Ask for Latest offer / Availability : https://bit.ly/38UjHXb
- Brand: Orange
- Voltage: 24V
- RPM: 15
- Gear Ratio: 180:1
- Low Noise
- Smooth Ruining
- Weight Lift: 200KG.1CM
SKU: PGI-001162509
