Motors | Drivers | Actuators Categories
Showing 25–48 of 162 results
-
-
Servo Motor
8 Channel Servo Controller SC08A
Ask for Latest offer / Availability :https://bit.ly/3laHWCK
-
Resolution: 8000 steps = 0.25us.
-
UART: 9600 baud rate.
-
Servo pulse range: 0.5ms to 2.5ms.
-
Dimension : 48 x 46 x 14 (LxWxH) mm.
- 8 channels: Servo-driven independently.
-
Extendable to 16 Channels: Two controllers linked together to drive 16 servos.
-
Optional Position Reporting: User may request the position of an individual servo.
SKU: PGI-007978 -
-
-
Motors | Drivers | Actuators Categories
920KV Brushless DC Motor – (CCW Motor Rotation)
Ask for Latest offers/availability : https://bit.ly/3iOJsdM
- Motor KV: 920 (RPM/V)
- No-Load Current (Io/10V): 0.45 Amps
- Li-PO Batteries: 2S-4S
- Motor Resistance (Rm): 0.117 Ohms
- Max Continuous Current: 14 Amps
- Max Power: 220 Watts
SKU: n/a -
Motors | Drivers | Actuators Categories, Prayog Blaster
A4988 driver Stepper Motor Driver- Good Quality
Motors | Drivers | Actuators Categories, Prayog BlasterA4988 driver Stepper Motor Driver- Good Quality
Ask for Latest offers/availability : https://bit.ly/3qv7v2n
- Low RDS (On) Output
- Automatic current decay mode detection / selection Mix with slow current decay modes
- Synchronous rectification for low power dissipation
- Internal UVLO, · Cross-current protection · 3.3 and 5 V compatible logic supply · Thermal shutdown circuitry · Ground fault protection · Load short-circuit protection
SKU: PGI-0060 -
Motor Driver
Cytron 10Amp 7V-30V DC Motor Driver for R/C (2 Channel) MDDRC10
Ask for latest offers/availability : https://bit.ly/3u1Pg6R
- Operating Voltage: DC 7 V to 30 V
- Maximum Motor Current: 10 A continuous, 30 A peak
- Motor Output PWM Frequency: 20 kHz
- RC Input Voltage (RC1 & RC2): Low Level: 0-0.7 V | High Level: 1.5-15 V
- Output Maximum Current: 0-500 mA
SKU: PGI-00945382 -
Motor Driver
Cytron 25A DC motor driver with Switch and Potentiometer Control (MD25HV POT)
Ask for Latest offers/availability : https://bit.ly/3ni9Gbx
- Bidirectional control for one brushed DC motor.
- Maximum Motor Current: 25A continuous, 60A peak.
- 5V output for the host controller (250mA max).
- Buttons for quick testing.
- PWM frequency up to 40kHz.
- Dual Input Mode: PWM/DIR or Potentiometer/Switch Input.
SKU: PGI-00497900 -
Motor Driver
Cytron 30Amp DC Motor Driver (Peak 80Amp) MD30C R2
Ask for Latest offers/availability : https://bit.ly/3z3t6my
- Bi-directional control of 1 brushed DC motor.
- Motor Voltage: 5V – 25V.
- Maximum Current: 80A peak (1 second), 30A continuously.
- Reverse polarity protection.
- 3.3V and 5V logic level input.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
SKU: PGI-002774 -
Motor Driver
Cytron Dual Channel Enhanced 10 Amp DC Motor Driver 30A Peak MDD10A
Ask for Latest offers/availability : https://bit.ly/3z0ppxZ
- Bi-directional control of 2 brushed DC motor.
- Support motor voltage ranges from 5V to 25V.
- Maximum current up to 10A continuous and 30A peak (10 seconds) for each channel.
- Solid state components provide faster response time and eliminate the wear and tear of the mechanical relay.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
SKU: PGI-003405 -
Motors | Drivers | Actuators Categories
Cytron Enhanced 13Amp DC Motor Driver 30A peak (10 seconds) MD10C
Motors | Drivers | Actuators CategoriesCytron Enhanced 13Amp DC Motor Driver 30A peak (10 seconds) MD10C
Ask For Availability :- https://bit.ly/2Qe1pow
- Bi-directional control of 1 brushed DC motor.
- Support motor voltage ranges from 5V to 25V.
- Maximum current up to 13A continuous and 30A peak (10 seconds).
- 3.3V and 5V logic level input.
- Solid state components provide faster response time and eliminate the wear and tear of the mechanical relay.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
SKU: PGI-002777 -
Motor Driver
Cytron Maker Drive H-Bridge Motor Driver
Ask for Latest offers/availability : https://bit.ly/3A0vrjJ
- Dual channel, Bi-directional control motor driver
- Support motor voltage from 2.5V to 9.5VDC
- Maximum current up to 1.0A continuous and 1.5A peak (<5 seconds)
- 5V Output (200mA) to power the controller.
- Inputs compatible with 1.8V, 3.3V and 5V logic (Arduino, Raspberry Pi, etc).
- Solid state components provide faster response time and eliminate the wear and tear of mechanical relay
- Regenerative Braking
SKU: PGI-00381588 -
Motor Driver
Cytron MDS160A SmartDrive160 160AMP Dc Motor Driver (Peak 190Amp)
Ask for Latest offers/availability : https://bit.ly/38Txn1x
- Bi-directional control for a single brushed DC motor.
- Support input voltage from 8V to 28V.
- Maximum current up to 190A peak (1 minute), 175A (2 minutes) or 160A (continuously).
- 16 KHz switching frequency for quiet operation.
- LiPo battery low voltage warning.
- Thermal protection.
SKU: PGI-002784 -
Motor Driver
CYTRON SMART DRIVE MDDS30 DUAL 30A (80A Peak)
Ask for Latest offer / Availability :- https://bit.ly/3b7iHKH
- Battery low voltage indicator.
- Battery over voltage indicator.
- Thermal protection.
- Current limit protection.
- Bi-directional control for dual brushed DC motor.
- Support motor voltage from 7V to 35VDC.
- Dimension: 103 x 97 x 40 (LxWxH) mm
SKU: PGI-0029672 -
Motor Driver, Prayog Blaster
Cytron SmartDriveDuo-10 MDDS10 DC MOTOR DRIVER
Ask for Latest offer / Availability : https://bit.ly/3pTZPX6
-
Single power operation
-
Dual Channels means it can drive two brush motor independently, or mixed.
- Support Signed magnitude and Locked Anti-phase in PWM mode.
-
Two manual/test buttons for each channel.
-
Two output indicator LEDs for each channel.
-
Power, Error indicator, RUN status (Left and Right) LEDs
-
On board reset button to restart the MCU after changing operation mode.
-
Operating modes: RC (RC servo signal), Analog, PWM, simplified and packetized UART.
SKU: PGI-004565 -
-
Motor Driver
Cytron SmartDriveDuo-60 MDDS60 60A (100A peak)
Ask for Latest offers/availability : https://bit.ly/3jXDesF
-
DC Brush motor Driver, not for brushless motor
-
Input Voltage (Motor): 7 – 45VDC
-
Two manual/test buttons for each channel.
-
Two output indicator LEDs for each channel.
-
Suitable for combat or sumo robot.
- Battery Low Voltage Monitoring Mode
SKU: PGI-008014 -
-
Motors | Drivers | Actuators Categories
DC 12V KK-P50/30 60KG Lifting Solenoid Electromagnet
Ask for Latest offers/availability : https://bit.ly/2YvOWCJ
- Operating Voltage: 12V DC
- Lifting Capacity: 60KG
- Size (D x L): 50 x 30 mm
- Electric lifting magnet.
- Powerful and compact.
- Smooth and flat surface.
- Low consumption and reliable.
- Ambient temperature within 130 degrees.
SKU: PGI-00130285 -
Motors | Drivers | Actuators Categories, Plastic Gear Box Motor
DC Motor – 1000RPM – 12Volts
Ask for Latest offer / Availability : https://bit.ly/2U14OuE
- The metal gears have better wear and tear properties.
- The gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 100 RPM at 12V, the motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 0.5
- Stall Torque(kg-cm): 2.0
SKU: PGI-00141 -
Motors | Drivers | Actuators Categories, Plastic Gear Box Motor
DC Motor – 100RPM – 12Volts
Ask for Latest offer / Availability : https://bit.ly/3gtPFLm
- The metal gears have better wear and tear properties.
- Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 100 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 2.9
- Stall Torque(kg-cm): 11.4
SKU: PGI-00140 -
Motors | Drivers | Actuators Categories, Plastic Gear Box Motor, Prayog Blaster
DC Motor – 10RPM – 12Volts
Motors | Drivers | Actuators Categories, Plastic Gear Box Motor, Prayog BlasterDC Motor – 10RPM – 12Volts
Ask for Latest offer / Availability : https://bit.ly/3bHlj49
- The metal gears have better wear and tear properties.
- Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 10 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 7
- Stall Torque(kg-cm): 28
SKU: PGI-005643 -
Motors | Drivers | Actuators Categories, Plastic Gear Box Motor, Prayog Blaster
DC Motor – 3RPM – 12Volts
Motors | Drivers | Actuators Categories, Plastic Gear Box Motor, Prayog BlasterDC Motor – 3RPM – 12Volts
Ask for Latest offer / Availability : https://bit.ly/2MvBWYe
- The metal gears have better wear and tear properties.
- Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 3 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 16
- Stall Torque(kg-cm): 60
SKU: PGI-004 -
Motors | Drivers | Actuators Categories, Plastic Gear Box Motor
DC Motor – 60RPM – 12Volts
Ask for Latest offer / Availability : https://bit.ly/2PhN8ZD
- The metal gears have better wear and tear properties.
- Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 60 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 3.6
- Stall Torque(kg-cm): 15
SKU: PGI-005 -
Motor Driver
Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module
Ask for Latest offers/availability : https://bit.ly/3ldzBhW
- Input voltage(V): 6 – 27.
- Maximum current(A): 43.
- Input level(V): 3.3 – 5.
- Duty cycle: 0 – 100%.
- Path resistance: 16 mΩ at 25°C.
- Low quiescent current: 7 µA at 25°C.
SKU: PGI-00456144 -
Motor Driver
Dual Monster Moto Shield VNH2SP30 DC Motor Driver 2x14A (Peak 30A)
Ask for Latest offer / Availability : https://bit.ly/3l8ddVj
- Voltage Max: 16V
- Maximum current rating: 30 A
- Practical Continuous Current: 14 A
- Current sensing available to Arduino analog pin
- MOSFET on-resistance: 19 mΩ (per leg)
- Maximum PWM frequency: 20 kHz
- Thermal Shutdown
- Undervoltage and Overvoltage shutdown.
SKU: PGI-0028535
