Motor Driver

           Ask for latest offers/availability : https://bit.ly/3u1Pg6R

1. Operating Voltage: DC 7 V to 30 V
2. Maximum Motor Current: 10 A continuous, 30 A peak
3. Motor Output PWM Frequency: 20 kHz
4. RC Input Voltage (RC1 & RC2): Low Level: 0-0.7 V | High Level: 1.5-15 V
5. Output Maximum Current: 0-500 mA

Ask for Latest offers/availability : https://bit.ly/3ni9Gbx

1. Bidirectional control for one brushed DC motor.
2. Maximum Motor Current: 25A continuous, 60A peak.
3. 5V output for the host controller (250mA max).
4. Buttons for quick testing.
5. PWM frequency up to 40kHz.
6. Dual Input Mode: PWM/DIR or Potentiometer/Switch Input.

Ask for Latest offers/availability : https://bit.ly/3A0vrjJ

1. Dual channel, Bi-directional control motor driver
2. Support motor voltage from 2.5V to 9.5VDC
3. Maximum current up to 1.0A continuous and 1.5A peak (<5 seconds)
4. 5V Output (200mA) to power the controller.
5. Inputs compatible with 1.8V, 3.3V and 5V logic (Arduino, Raspberry Pi, etc).
6. Solid state components provide faster response time and eliminate the wear and tear of mechanical relay
7. Regenerative Braking

Ask for Latest offers/availability : https://bit.ly/38Txn1x

1. Bi-directional control for a single brushed DC motor.
2. Support input voltage from 8V to 28V.
3. Maximum current up to 190A peak (1 minute), 175A (2 minutes) or 160A (continuously).
4. 16 KHz switching frequency for quiet operation.
5. LiPo battery low voltage warning.
6. Thermal protection.

Ask for Latest offers/availability : https://bit.ly/3jXDesF

1. DC Brush motor Driver, not for brushless motor
2. Input Voltage (Motor): 7 – 45VDC
3. Two manual/test buttons for each channel.
4. Two output indicator LEDs for each channel.
5. Suitable for combat or sumo robot.
6. Battery Low Voltage Monitoring Mode

Ask for Latest offers/availability : https://bit.ly/3ldzBhW

1. Input voltage(V): 6 – 27.
2. Maximum current(A): 43.
3. Input level(V): 3.3 – 5.
4. Duty cycle: 0 – 100%.
5. Path resistance: 16 mΩ at 25°C.
6. Low quiescent current: 7 µA at 25°C.

Ask for Latest offers/availability : https://bit.ly/3tvE2IJ

1. Power supply: DC 24-60 (V)
2. Current maximum: 4.5A
3. Output phase current:1 .5A-4.5A
4. Logic input current: 1 0-20mA
5. Optical isolation signal input
6. Output current DIP switch is adjustable

Ask for Latest offers/availability : https://bit.ly/308ZB3V

•  Maximum current: 7.2A, resolution: 0.1A
•  Subdivision range: 400~25600ppr
•  Impulse response frequency: 200KHz
•  DC power supply
•  The input voltage range: 24~80VDC or AC both OK;
•  Power supply is greater than 200W. Recommend 48VDC or 48V AC
•  Operating Temperature: -10℃~45℃

Ask for Latest offers/availability : https://bit.ly/2VDBonK

1. 60A continuous, 120A peak per channel
2. 6-30V nominal, 33.6V absolute maximum
3. Synchronous regenerative drive
4. Ultra-sonic switching frequency
5. Thermal and overcurrent protection
6. Lithium protection mode

Ask for Latest offer / Availability : https://bit.ly/2ES0wi0

1. 16 channels: Servo driven independently
2. Resolution: 1.367us.
3. UART: 9600 baud rate
4. Servo pulse: 0.5ms to 2.5ms.
5. Dimensions : 83 x 48 x 13 (LxWxH) mm.

               Ask for Latest offers/availability : https://bit.ly/37RFo6n

1. Two-phase stepper motor single-phase current 1.2A (peak 2.5A) motor current can be adjusted.
2. Only SPI support.
3. Broken down into 256.
4. Combines maximum efficiency and best motor torque for noiseless operation.

             Ask for Latest offers/availability : https://bit.ly/3iSE6P0

1. Voltage range: 3.3-5V
2. Maximum current: 1.2A per phase (continuous, with cooling), 2A peak per phase
3. Works with 3.3V and 5V signals
4. Comes with heatsink for better cooling
5. Has StealthChop technology for quieter stepper motors
6. Has SpreadCycl technology for smoother movements