Gsm/Gprs
Showing all 15 results
-
Gsm/Gprs
1575 Mhz GPS Antenna for GPS & GSM module with 3 Meter Cable-Good Quality
Ask for latest offers/availability :
- Frequency (MHz) 1575 +/- 5 MHz
- Gain > 28 dBi (with LNA)
- Impedance (Ω) 50 Ω
- VSWR < 1.5
- Polarization RHCP
- Power Handling (W) 50 watts
- Cable Length: 3Meter
- Connector: SMA-Male
SKU: PGI-00778895 -
Gsm/Gprs
2.4GHz 3.2dBi RP-SMA Male Omni Antenna for WiFi
Ask for latest offers/availability : https://bit.ly/2SOXUFF
- 2.4GHz applications
- 3.2dBi gain
- Antenna Connector: RP-SMA Male.
- 360º Rotation and tilt capabilities
- Omni-directional radiation.
- Antenna Type: Whip, Tilt.
- Max Height of Antenna: 19 cm
SKU: n/a -
Gsm/Gprs
GPS/GLONASS GNSS Antenna for Raspberry Pi HAT and Arduino Shield with 3 Meter Cable
Ask for latest offers/availability : https://bit.ly/2KXYlZM
- This GPS/GLONASS GNSS Antenna is designed for applications which require high positioning accuracy by combining signals from GPS, GLONASS, systems. The tiny size of this antenna allows it to be used in very space restricted environments.
SKU: n/a -
Gsm/Gprs
GSM SIM800C Modem shield for arduino with Antenna
Ask for latest offers/availability : https://bit.ly/2xtT350
- The Modem is built with Quad-Band GSM/GPRS engine-SIM800C from SIMCOM, works on frequencies 850/ 900/ 1800/ 1900 MHz. The Modem is populated with DB9 Female connector so as to directly connect with computer or other RS232 Compatible devices.
SKU: n/a -
Gsm/Gprs
SAM Head Sucker Antenna for SIM900A SIM908 Development Board dedicated Antenna
Ask for latest offers/availability : https://bit.ly/3flVKaa
- Frequency range: 800MHz, 900MHz, 1200MHz, 1500MHz, 1800MHz, 1900MHz.
- gain : 7 (dB).
- The antenna height (mm):90
- Cable Length:2 Meter
- Connector Type:SMA(male)
- Standing wave ratio: ≤1.5
- Input impedance: 50 Ω
SKU: n/a -
Gsm/Gprs
SIM7600EI 4G LTE High-Speed Modem GPS/GNSS IoT board
Ask for latest offers/availability : https://bit.ly/3ffVnO9
- Multi-band LTE-FDD/LTE-TDD/HSPA+/UMTS/EDGE/GPRS/GSM module solution in LCC type
- Supports LTE CAT1 up to 10Mbps for downlink & 5Mbps for uplink data transfer
- Designed in the compact and unified form factor
- Compatible with SIMCom HSPA+ SIM5360 module/LTE CAT3 SIM7100 and LTE CAT4 SIM7600E-H module
SKU: n/a -
Gsm/Gprs, IoT and Wireless
SIM7600EI 4G LTE High-Speed Modem GPS/GNSS IoT board Raspberry Pi Compatible
Gsm/Gprs, IoT and WirelessSIM7600EI 4G LTE High-Speed Modem GPS/GNSS IoT board Raspberry Pi Compatible
Ask for Latest offer / Availability : https://bit.ly/3xlBUV6
- Multi-band LTE-FDD/LTE-TDD/HSPA+/UMTS/EDGE/GPRS/GSM module solution in LCC type
- Supports LTE CAT1 up to 10Mbps for downlink & 5Mbps for uplink data transfer
- Designed in the compact and unified form factor
- Compatible with SIMCom HSPA+ SIM5360 module/LTE CAT3 SIM7100 and LTE CAT4 SIM7600E-H module
SKU: PGI-00336554 -
Gsm/Gprs
SIM800A Quad Band GSM/GPRS Module with RS232 Interface
Ask for latest offers/availability : https://bit.ly/35vJtLO
- Quad-band 850/900/1800/1900MHz.
- GPRS class 2/10.
- Input Voltage : 9V-12V DC.
- Control via AT commands (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT command set).
- Configurable baud rate.
- Built-in SIM Card holder.
- Built-in Network Status LED.
SKU: n/a -
-
Gsm/Gprs
SIM800L GPRS GSM Module Core Board Quad-band TTL Serial Port with the antenna
Ask for latest offers/availability : https://bit.ly/2z7ibPw
- TTL serial port for serial port, you can link directly to the micro-controller.
- Don’t need MAX232.
- Power module automatically boots, homing network.
- Onboard signal lights all the way.
- It flashes slowly when there is a signal, it flashes quickly when there is no signal.
SKU: n/a -
Gsm/Gprs
SIM800L V2.0 5V Wireless GSM GPRS MODULE Quad-Band with Antenna
Ask for latest offers/availability : https://bit.ly/3b5fE5z
- Network support: Quad-Band 850/900/1800/1900 MHz – works on GSM networks in all countries across the world.
- TTL serial interface compatible with 3.3V and 5V MCU
- the small size is suitable for all kinds of sleeve belt type and embedded.
- Power supply: 5 -20 V.
- Power Interface: 2.54 mm Pin header or MICRO USB interface.
SKU: n/a -
Gsm/Gprs
SIM808 GSM/GPRS/GPS Bluetooth Compatible Development Board With GPS Antenna (Arduino and Raspberry Pi Compatible)
Gsm/GprsSIM808 GSM/GPRS/GPS Bluetooth Compatible Development Board With GPS Antenna (Arduino and Raspberry Pi Compatible)
Ask for latest offers/availability : https://bit.ly/3fecIHb
- 22 tracking/66 acquisition channel.
- GPS L1 C/A code.
- Precision: Tracking: -165dBm.
- Cold start: -148dBm.
- Supports Quad-band 850/900/1800/1900MHz.
- Accuracy: ~2.5m.
- GPRS multi-slot class 12/10.
SKU: n/a -
-
Gsm/Gprs
SmartElex GSM/GPRS/GNSS Bluetooth HAT for Raspberry Pi
Ask for latest offers/availability : https://bit.ly/3fgQgNS
- Based on the Quectel M66 Module
- Send/Receive SMS
- Make/Receive voice call with 3.5mm audio jack.
- Quad-band module (850/ 900/ 1800/ 1900MHz).
- Include Onboard Bluetooth BT 3.0 with an antenna.
- Controlled via AT commands.
- Compatible with all Raspberry Pi Version
- Autobauding 4800bps to 115200bps.
SKU: n/a -
Gsm/Gprs
Ublox NEO-M8N GPS with Compass for Pixhawk with extra connector for APM
Ask for Latest offer / Availability : https://bit.ly/33oihPm
- Ready to Connect to PIXHAWK FC with 6-pin connector Attached
- Receiver type 72-channel Ublox M8 engine
- Galileo-ready E1B/C (NEO-M8N)
- Nav. update rate1 Single GNSS: up to 18 HZ
- Acquisition Cold starts: 26 s
- Onboard Compass
SKU: PGI-57286
