Sensors
Showing 1–24 of 312 results
-
Light/Color Sensor
12mm GL12528 Light Sensitive Photoresistor LDR (2Pcs)
Ask for latest offers/availability : https://bit.ly/34WZObP
- Diameter: 12 mm
- No. of pins: 2
- Type of mounting: PCB Through Hole
- Maximum Operating Temperature: +70˚C (Approx.)
- Dark resistance: 1-20MΩ
- Spectral peak: 560nm
- Maximum voltage: 250 VDC
- Maximum wattage: 200 mW
- Light resistance (10 Lux): 10-20 KΩ
- Dark resistance: 2 MΩ
- Resistance illumination: 3
- Response time: 20ms (Rise), 30ms (Down)
SKU: PGI-00611822 -
-
Current and Voltage Sensor
20A Range Current Sensor Module ACS712
Ask for latest offers/availability : https://bit.ly/2YdgLOb
- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: 20A
- Sensitivity: 100mV/A
SKU: PGI-0023911 -
-
IR And PIR Sensor
3 Channel Path Tracing Module
Ask for latest offers/availability : https://bit.ly/2XTycmC
- Working voltage: 5V
- Uses infrared light detection, anti-jamming capability, using CTRT5000 sensor, adjustable sensitivity, stable performance
- With lights, a fixed bolt hole for easy installation
SKU: PGI-00699505 -
Temperature and Humidity Sensor
3 Pin NTC Thermistor Temperature Sensor Module
Ask for latest offers/availability : https://bit.ly/355fgmo
- Adopt the NTC thermistor sensor, sensitivity is good
- The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma.
- With potentiometer to adjust the temperature detection threshold
- Working voltage: 3.3 V to 5 V
- Output form: digital switch output (0 and 1)
- It has a fixed bolt hole, convenient installation
SKU: PGI-00365937 -
Current and Voltage Sensor
30A range Current Sensor Module ACS712
Ask for latest offers/availability : https://bit.ly/2xLm9NF
- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: 30A
- Sensitivity: 100mV/A
SKU: PGI-0012264 -
-
-
IR And PIR Sensor
44 Keys RGB IR Remote Controller for 12V 5050 RGB LED Strip
Ask for latest offers/availability : https://bit.ly/2KsY5BW
Supply voltage: DC 12V
Output current: 2 A each color
Connecting mode: common anode
Output: Three CMOS Drain-open Output
Number Of buttons: 44
Working temperature: -20℃-60℃SKU: PGI-00699509 -
Temperature and Humidity Sensor
4PIN NTC Thermistor Temperature Sensor Module
Ask for latest offers/availability : https://bit.ly/2Y3SYjk
- NTC Thermistor temperature sensor module is low cost, small size module. It is very sensitive to ambient temperature. It is generally used to detect the temperature of the surrounding environment.
SKU: PGI-00366201 -
Temperature and Humidity Sensor
5-Channel Flame Sensor Module
Ask for latest offers/availability : https://bit.ly/2S6DeZl
- Detecting range: >120 degree
- Analog and digital outputs
- On-board potentiometer and indicators
- 1% resistors to make this module more reliable and precise
- Operating Voltage: 3.3V – 9V
- Board Diameter: 40 mm.
SKU: PGI-0051754 -
Load / Pressure / Force / Flex Sensor
50kg Half-bridge Experiments Body Scale Load Cell Sensor
Ask for latest offers/availability : https://bit.ly/3eWyVcB
- Capacity (Kg): 50.
- Output Sensitivity (mv/v): 1.0±0.1.
- Nonlinearity (%FS): 0.03.
- Repeatability (%FS): 0.03.
- Input Resistance (Ω): 1000.
- Insulation Resistance (MΩ): ≥5000.
SKU: PGI-0031432 -
Current and Voltage Sensor
5A 12V Overcurrent Protection Sensor Module AC Current Detection Sensor
Ask for Latest offer / Availability : https://bit.ly/3iqtS50
LC 5A Over-current protection Sensor module uses a current transformer to collect the AC signal to achieve the relay over-current signal output within 0-5A. Relay pull while over-current, relay released while not over-current
SKU: PGI-00400224 -
Current and Voltage Sensor
5A range Current Sensor Module ACS712
Ask for latest offers/availability : https://bit.ly/2Y0Odal
- Low-noise analog signal path.
- Device bandwidth is set via the new FILTER pin.
- 5 µs output rise time in response to step input current.
- Small footprint, low-profile SOIC8 package.
- 2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8.
SKU: PGI-0023910 -
Current and Voltage Sensor
5A range of single-phase AC current sensor module
Ask for latest offers/availability : https://bit.ly/2VTjwRL
- Onboard precision microcurrent transformer.
- Onboard sampling resistor.
- The module can measure AC currents less than 5A, the corresponding analog output 5A/5mA.
- Rated input current: 5A
- Rated output current: 5mA
- Change: 1000: 1
- The linear range: 0 ~ 10A (100 ohms)
- Linearity: 0.2%
SKU: PGI-0028369 -
Sound Sensor
6-12VDC Mini Microphone Pickup Aerial Audio Signal Collection For Camera FPV QAV250 mini Quadcopter
Sound Sensor6-12VDC Mini Microphone Pickup Aerial Audio Signal Collection For Camera FPV QAV250 mini Quadcopter
Ask for latest offers/availability : https://bit.ly/3aqnp66
- Supply Voltage: 6-12VDC
- Frequency Range: 100-5500 Hz
- Output: 2.5Vpp/-25db
- Low noise
- High fidelity
- Wide working voltage range
- Low power consumption
- Long transmission distance
SKU: PGI-0045833 -
Prayog Blaster, Sensors
650nm 6mm 5V DC 5mW Mini Laser Dot Diode Module
Ask for Latest offer / Availability : https://bit.ly/3e0LOo8
- Output Power: 5mW
- Working Voltage: 5V DC
- Working temperature: -10 ℃~+40 ℃
- Housing material: Copper
- Working life: more than 2000 hours
- Spot mode: Dot Facula (continuous output)
- Laser wavelength: 650nm red-colored.
- Operating current: <40mA
- Power lead length: 120mm.
SKU: PGI-0016339 -
Vibration/Tilt Sensor
801S Vibration Shock Sensor Module
Ask for latest offers/availability : https://bit.ly/3cPHVhY
- Has a signal output instruction
- When the output valid signal is high, the light goes out
- The sensitivity is adjustable (fine-tuning)
- The wide detection range of vibration, no direction
- With mounting holes, firmware installation is flexible and convenient.
SKU: PGI-0043743