Electronic Components & IC's
Showing 745–768 of 880 results
-
Relay
SmartElex Dual Channel Battle Relay
Ask for latest offers/availability : https://bit.ly/3fttvq1
- Max current and voltage:
- 10A @ 120VAC
- 7A @ 250VAC
- 10A @ 24VDC
- Relay resistance: 100 mΩ max
- Module operating voltage: 4.8V to 5.2V
- 30mA typical draw from receiver
- Powerful auxiliary weapons control in RC combat.
- Glow plugs control in RC nitro vehicles.
SKU: n/a - Max current and voltage:
-
Circuit Board
SmartElex GPS HAT for Raspberry Pi
- High Tracking and Acquisition sensitivity
- The multi-GNSS engine for GPS, GLONASS, Galileo, and QZSS
- 99 acquisition channels, 33 tracking channels.
- Balloon mode, for high altitude up to 80km.
- PPS VS. NMEA can be used for time service.
- Support SDK command developed by Quectel.
- Automatic antenna switching function.
- Built-in Real Time Clock (RTC)
- PPS output on a fix.
- Internal patch antenna
- Fix status LED blinks to let you know when the GPS has determined the current coordinates.
- Great anti-jamming performance
SKU: PGI-00124975 -
Sensors
SmartElex RLS-08 Analog & Digital Line Sensor Array
Ask for Latest offers/availability : https://bit.ly/3kZOchR
- Operating voltage: 4.5V to 5.0 V
- Supply current: 150 mA
- Output format: 8 Analog and Digital voltages.
- Optimal sensing distance: 3 mm.
- Maximum recommended sensing distance: 6 mm
- Potentiometer to adjust the sensitivity of the individual sensors.
- Uses 8 sensors for best resolution
- Comes with easy to use digital outputs that can be connected directly to microcontrollers
SKU: PGI-0078725 -
Sensors
SmartElex RLS05 Line Follower Sensor Module
Ask for Latest offers/availability : https://bit.ly/3mjDfal
- Operating Voltage Range: 9~12V
- Maximum Operating Current: 130 mA
- Optimal Sensing Distance: 0.125″ (3 mm).
- Fast response time
- High sensitivity
- 5 Analog and 5 Digital Output signals with Respective LED.
- Each IR has indicating LED (D0-D4).
- Available SPI and Serial communication Pins.
SKU: PGI-0074474 -
Line Sensor
SmartFlex RLS-06 Analog & Digital Line Sensor Array
Ask for latest offers/availability : https://bit.ly/2KEBtOZ
- Operating voltage: 4.5V to 5.0 V
- Output format: 6 Analog and Digital voltages.
- Optimal sensing distance: 0.125″ (3 mm).
- Potentiometer to adjust the sensitivity of the individual sensors.
- The module is a convenient carrier for six IR emitter and receiver pairs evenly paced.
- Great useful in building fast line following and grid navigating robots
- Comes with easy to use digital outputs that can be connected directly to microcontrollers
SKU: PGI-0063761 -
Environmental Sensors
Soil Moisture Meter, Soil Humidity Sensor, Water Sensor, Soil Hygrometer for Ardunio
Environmental SensorsSoil Moisture Meter, Soil Humidity Sensor, Water Sensor, Soil Hygrometer for Ardunio
Ask for Latest offer / Availability : https://bit.ly/2YgynbZ
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
- Operating Voltage: 3.3V~5V
SKU: PGI-0012251 -
Electronic Components & IC's, Prayog Blaster
Solar Panel Power Cell Battery Charger 70mm x 70mm
Ask for Latest offers/availability : https://bit.ly/3rCJ1Wd
- Net weight: 51g; package content: 3 pcs x solar panel
- Main color: black; rated voltage: 4v 90ma
- Rated power: 0.36w
- Size: 70mm x 70mm(l*w)
SKU: PGI-0064 -
-
Soldering Iron, Soldering Tools
Soldering Iron Stand 25W
Ask for Latest offer / Availability : https://bit.ly/3ra70wp
- Heavy-duty base to uphold the weight of Soldering iron 25W or lesser
- Nickel-plated spring holder
- Spring holder provides substantial room for holding the soldering iron support
SKU: PGI-00769917 -
-
Relay
Songle Single-channel 5V 30A Relay Module Power Failure Relay
Ask for latest offers/availability : https://bit.ly/2Leu0Gv
- Voltage version: 5V
- The static current: 5mA
- Working current: 190mA
- Trigger current: 2-4mA
- The module can be set high level or low-level trigger by the jumper
- Rated current of the interface is 16A
SKU: n/a -
Sound Sensor
Sound Detection Module Sensor for Intelligent Vehicle Compatible With Arduino
Ask for latest offers/availability : https://bit.ly/2ywq8xy
- Main chip: LM393, Electret condenser microphone
- Working voltage: DC 3.3-5V
- Induction distance is 0.5M
- Signal output Indication
- Single channel signal output
- The output effective signal is low level.
SKU: PGI-0011584 -
Thermoelectric Peltier Cooler
SP1848-27145 40x40mm Thermoelectric Power Generator TEG 150°C Peltier Module
Thermoelectric Peltier CoolerSP1848-27145 40x40mm Thermoelectric Power Generator TEG 150°C Peltier Module
Ask for latest offers/availability : https://bit.ly/2VDF2uZ
- Small and lightweight, convenient for use.
- Designed specifically for power generation.
- Sealed for moisture protection and contain thermal elements formulated for optimum Seebeck power generation.
- High-temperature 120°C, with NM static protection.
- Operating Temperature: 0-150°C
- Maximum Temperature: 150°C
- Open Circuit Voltage: 4.8V
SKU: PGI-0026317 -
Thermoelectric Peltier Cooler
SP1848-27145 Thermoelectric Power Generator/Thermocooler Peltier Module
Thermoelectric Peltier CoolerSP1848-27145 Thermoelectric Power Generator/Thermocooler Peltier Module
Ask for latest offers/availability : https://bit.ly/3bED9Uv
- Small and lightweight, convenient for use.
- Designed specifically for power generation.
- Sealed for moisture protection and contain thermal elements formulated for optimum Seebeck power generation.
- High-temperature 120°C, with NM static protection.
- Operating Temperature: 0-120°C
- Maximum Temperature: 120°C
- Open Circuit Voltage: 4.8V
SKU: PGI-0026609 -
Current and Voltage Sensor
SparkFun Current Sensor Breakout – ACS723
Ask for latest offers/availability : https://bit.ly/2x1tkka
- Analog output with bandwidth adjustable to 80kHz.
- Measures DC and AC currents up to 10 mA ~ 5A.
- Full electrical isolation of measured and sensed circuits.
- The version without the op-amp has a base sensitivity of 400mV/A.
SKU: PGI-00637309 -
Sensors
SparkFun MLX90393 Triple Axis Magnetometer Breakout Board
Ask for Latest offer / Availability : https://bit.ly/3dHHDNG
- Operating Voltage: 2.2V-3.6V
- Current Consumption: 100µA (Typ.)
- Operating Temperature: -20°C – 85°C
- Resolution: 0.161µT
- Max Full Scale Resolution: 44,000µT
- I2C Address: 0xC0
SKU: PGI-00637311 -
Sound Sensor
Speak (Voice) Recognition Module V3 compatible with Arduino
Ask for latest offers/availability : https://bit.ly/34UWSfY
- Supply Voltage: 4.5 – 5.5 V.
- Current : <40 mA.
- Digital Interface : 5V TTL level for UART interface and GPIO.
- Support maximum 80 voice commands, with each voice 1500ms (one or two words speaking).
- Maximum 7 voice commands effective at same time.
- Arduino library is supplied.
- User-control General Pin Output.
SKU: PGI-0043073 -
Load / Pressure / Force / Flex Sensor, Prayog Blaster
Spectra Symbol Flex Sensor 2.2″ Bend Sensor for Hand Gesture Recognition
Load / Pressure / Force / Flex Sensor, Prayog BlasterSpectra Symbol Flex Sensor 2.2″ Bend Sensor for Hand Gesture Recognition
Ask for Latest offer / Availability : https://bit.ly/3c45YLr
- Flex length: 5.6 cm.
- Total Length: 2.2″ (7 cm).
- Life Cycle : >1 million.
- Height : 0.43mm (0.017″),
- Flat Resistance: 10K Ohms ±30%.
- Power Rating: 0.5 Watts.
SKU: PGI-0022341 -
Load / Pressure / Force / Flex Sensor
SpectraSymbol Flex Sensor 2.2″ Bend Sensor for Hand Gesture Recognition
Load / Pressure / Force / Flex SensorSpectraSymbol Flex Sensor 2.2″ Bend Sensor for Hand Gesture Recognition
Ask for latest offers/availability : https://bit.ly/2SbE476
- Flex length: 5.6 cm.
- Total Length: 2.2″ (7 cm).
- Life Cycle : >1 million.
- Height : 0.43mm (0.017″),
- Flat Resistance: 10K Ohms ±30%.
- Power Rating: 0.5 Watts.
SKU: n/a -
Rotary Encoder
Speed Measuring Sensor Groove Coupler Module For Arduino
Ask for latest offers/availability : https://bit.ly/2VR7ZlW
- Using imported groove optical coupling sensor, width 5mm.
- It has the output state light, if output high level, the lights are off. if output low level, it on.
- If it covered, it will output high level; otherwise, its output low level.
- Good signal and waveform, with a strong driving ability for more than 15mA.
- Equipped with a fixed bolt hole, easy install.
- Use the LM393 wide voltage comparer.
SKU: PGI-0044101
