Electronic Components & IC's
Showing 25–48 of 880 results
-
Display
12864B V 2.0 Graphic Blue Color Backlight LCD Display Module
Ask for Latest offer / Availability : https://bit.ly/3juey8B
- Based on ST7920
- 128 X 64 pixels
- Operating voltage: 5V
- Led Backlight
- Module size: 93mm x 70mm x 12mm
- Viewing Area: 72mm x 40mm
- Display mode TN/STN
- Display type Positive Transflective
- Backlight VDD5.0V, Idd250mA
- Operating temperature Indoor
- Driving voltage Single power
- Driving method 1/64 duty,1/9 bias, VOP10.5V, VDD5.0V
- Type COB (Chip On Board)
- Number of data line 8-bit parallel
- Connector Pin / ZEBRA
SKU: PGI-43376 -
Light/Color Sensor
12mm GL12528 Light Sensitive Photoresistor LDR (2Pcs)
Ask for latest offers/availability : https://bit.ly/34WZObP
- Diameter: 12 mm
- No. of pins: 2
- Type of mounting: PCB Through Hole
- Maximum Operating Temperature: +70˚C (Approx.)
- Dark resistance: 1-20MΩ
- Spectral peak: 560nm
- Maximum voltage: 250 VDC
- Maximum wattage: 200 mW
- Light resistance (10 Lux): 10-20 KΩ
- Dark resistance: 2 MΩ
- Resistance illumination: 3
- Response time: 20ms (Rise), 30ms (Down)
SKU: PGI-00611822 -
Relay
12V 1 Channel Relay Module
Ask for latest offers/availability : https://bit.ly/2LLPGtS
- Brand new and high quality.
- 1-Channel Relay interface board,
- Equipped with high-current relay : 15A @ 125V AC or 10A @ 250V AC
- Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM)
SKU: PGI-00618374 -
-
-
Relay
12V 4 Channel Relay Module
Ask for latest offers/availability : https://bit.ly/2ZnoWYM
- 4-Channel Relay interface board and each one needs 15-20mA Driver Current.
- Both controlled by 12V and 5V input Voltage.
- Equipped with high-current relay, AC250V 10A ; DC30V 10A.
- Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic active low).
- Indication LED’s for Relay output status.
SKU: PGI-00618377 -
Relay
12V 6 Channel with Light Coupling Relay Module
Ask for latest offers/availability : https://bit.ly/2WPq85n
- Operating Voltage: 12V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
SKU: PGI-00618378 -
Relay
12V 8 Channel Relay Module
Ask for latest offers/availability : https://bit.ly/3ghktNg
- Using high-current relay, AC250V 10A DC30V 10A.
- Contact some independent wiring, safe and reliable.
- The standard interface can be extended to a variety of development boards.
- With fixed screw holes for easy installation.
- Suitable for a variety of platforms such as 8051/AVR/AVR/ARM.
SKU: PGI-00618383 -
Relay
12V Dual Channel Relay Module (with Light Coupling)
Ask for latest offers/availability : https://bit.ly/36eYh1q
- Operating Voltage: 12V DC
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- Mounting holes provided
SKU: PGI-0031210 -
-
Rfid Card, Tags & Readers
13.56MHz ER300D Plug and Play RFID Reader
Ask for latest offers/availability : https://bit.ly/3bvzRTe
- No Programming Required
- No Drivers Software need to Install
- Just Plug and Play
- Very low power required to operate
- Can Run even on mobile Phone Power
- Can detect UID cloned card
- Contactless USB smart card reader
SKU: PGI-00232585 -
Rfid Card, Tags & Readers
13.56MHz RFID IC Key Tag – 2pcs
Ask for latest offers/availability : https://bit.ly/2XXafe8
- Material: ABS
- Dimension(LxWxH): 43.7×30.5×5.3mm
- Response Frequency: 13.56MHz
- Chip type: FM1108 Fudan Chip
- Memory capacity: 8 kbit
- Designed for the RFID 13.56MHz duplicator. can copy all the ID card, such as Access Card, District Card, Parking etc.
SKU: PGI-0031360 -
Rfid Card, Tags & Readers
13.56MHz USB Proximity Sensor Smart RFID IC Card Reader
Ask for latest offers/availability : https://bit.ly/2Kqtch9
- USB Plug and Play.
- RFID reader 0-8cm Reading Distance.
- Win8/7/XP/Android Supported.
- S50/S70 Card Supported.
- OTG Phone Connection.
- Built-in buzzer and LED for identification.
SKU: PGI-00398013 -
Power Connector
141V 2.54mm Pitch PCB Straight Foot Connectors Terminal Block-1pcs
Ask for Latest offer / Availability : https://bit.ly/37Rs2rv
Rated voltage: 150V
Rated current: 2A
Wire range: 26~18AWG 1.0mm²
Contact Resistance: 20 m Ω
Insulation resistance: 500MΩ/DC500V
Withstand voltage: AC1300V / 1 minSKU: PGI-00817561 -
Connectors
15 CM Servo Lead Extention (JR) 26AWG-1Pcs.
Ask for Latest offer / Availability : https://bit.ly/2HQGg1u
- JR male plug and JR Female plug, compatible each other
- Servo extension cable, 3 pin female to male connector
- For RC Car, plane and helicopter servo connection or receiver connection.
- Wire Length: 150mm
- Color: As the pictures shown.
SKU: PGI-4143 -
IC's
16 Pin DIP IC Socket-Base-Connector suited for Microcontrollers
Ask for Latest offer / Availability : https://bit.ly/36BRjEI
- 16-Pins.
- JDEC standard Compliant.
- Moulded notch for proper orientation.
- Easy to insert and remove ICS.
- Multiple DIY projects.
- Application requiring replaceable ICS.
SKU: n/a -
