Electronic Components & IC's
Showing 385–408 of 880 results
-
Environmental Sensors
DSM501A PM2.5 Dust Sensor Module for Arduino, Air-Conditioners
Ask for latest offers/availability : https://bit.ly/2y2L7YG
- Can sense tobacco smoke and pollen, house dust and so on.
- It can measure 1 micron or more of small particles.
- Small size, lightweight, easy to install.
- 5 V input circuit for signal processing.
- Built-in airflow generator, you can attract the external atmosphere.
SKU: PGI-00418902 -
Display
DSO138 2.4″ TFT Handheld Pocket-size Digital Oscilloscope Kit DIY Parts Electronic Learning Set Soldered
DisplayDSO138 2.4″ TFT Handheld Pocket-size Digital Oscilloscope Kit DIY Parts Electronic Learning Set Soldered
Ask for Latest offer / Availability : https://bit.ly/3p5QrzX
- This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen.
- Adjustable vertical displacement, and with instructions.
- With automatic, regular and one-shot modes, easy to capture the moment waveform.
- Available rising or falling edge trigger.
- Observable previous trigger waveform (negative delay).
- Can freeze at any time waveform display (the HOLD function).
- Maximum Real-time Sampling Rate: 1Msps
- Accuracy: 12Bit
- Sampling Buffer Depth: 1024 bytes
- Analog Bandwidth: 0-200KHz
SKU: PGI-0028471 -
Microcontrollers
Due AT91SAM3X8E ARM Cortex-M3 Board with Micro USB Cable Compatible with Arduino
- Microcontroller: AT91SAM3X8E
- Operating Voltage: 3.3V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-16V
- Digital I/O Pins: 54 (of which 12 provide PWM output)
- Analog Input Pins: 12
- Analog Outputs Pins: 2 (DAC)
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
SKU: n/a -
-
Generic Ultrasonic Sensor
EasyMech Cartoon Bracket with HC-SR04 Ultrasonic sensor
Ask for latest offers/availability : https://bit.ly/2VRfs4z
- Operating Voltage: 5 V
- Sonar Sensing Range: 2-400 cm
- Max. Sensing Range: 4500 cm
- Frequency: 40 kHz
- Thickness: 2.8-3.1 mm
- The diameter of mounting hole: 3.0mm
- Mounting Bracket Material: Plastic
SKU: PGI-00720739 -
Biometric/ECG/EMG/Sensor
ECG GEL ELECTRODE (3M) Pack of 5
Ask for latest offers/availability : https://bit.ly/2VtG3Wm
- Good electrical characteristics
- Different base materials, sizes, and connections
- Monitoring electrode with foam tape and radiolucent stud.
- ECG Electrode with convenient abrader.
- ECG Electrode for monitoring applications requiring high adhesion.
- Adhesive foam tape backing and proprietary sticky gel ensure excellent skin contact.
- Remains fresh for 30 days out of the bag.
SKU: PGI-006326 -
-
Electronic Components & IC's
Electrical PVC Insulating Tape – 1 Piece Pack
Ask for Latest offer / Availability : https://bit.ly/3gCdxMG
- Glossy finish/Soft PVC film coated tape, suitably plasticized and stabilized
- One sided coating of rubber-based, pressure sensitive adhesives
- Backing: PVC, Thickness (mm/mils): 0. 12/4. 5, Adhesion (kg/cm/oz/in): 0. 18/16
- Elongation (%): 150, Tensile Strength (kg/cm/lbs/in): 2. 0/11
- Dimensions:- 0.13mm x 3/4 inches x 10 Yards
- Color – Yellow
SKU: PGI-00168 -
Sensors
Electrode Probe for Liquid pH Value Detection Sensor Module
Ask for Latest offers/availability : https://bit.ly/3mbeQDU
- PH range: 0-14 PH
- Temperature range: 0-60℃
- Zero-point: 7 ± 0.5PH
- Alkali Error: 0.2PH
- Theoretical Percentage Slope: ≧98.5%
- Internal Resistance: ≦250MΩ
- Response Time: ≦1min
SKU: PGI-00328377 -
Break out Boards
ESP-01 Adapter 3.3V 5V Board
Ask for latest offers/availability : https://bit.ly/2SReBQB
- On-board level shift circuit
- Arduino UNO R3 and the compatible board can directly connect to this module;
- Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit);
- Working voltage: 4.5~5.5V (Onboard 3.3V LDO Regulator);
- Working current: 240mA(MAX).
SKU: PGI=0062434 -
Relay
ESP8266 10A DC 7-30V Network Relay WIFI Module
Ask for latest offers/availability : https://bit.ly/3biOrws
- With ESP8266 Wifi module,4-layers board design.
- Input overvoltage protection, input with TVS, when the voltage exceeds 33V,
- automatic protection will operate.
- Input overcurrent protection.
- 220V 10A relay, one normally open, one normally closed.
- One way optocoupler isolation input, TVS input protection.
SKU: n/a -
Relay
ESP8266 WiFi 5V 1 Channel Relay Module IOT Smart Home Remote Control Switch Android Phone APP Control Transmission Distance 400m
RelayESP8266 WiFi 5V 1 Channel Relay Module IOT Smart Home Remote Control Switch Android Phone APP Control Transmission Distance 400m
Ask for latest offers/availability : https://bit.ly/35Klp81
- Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time
- Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay
- Transmission Distance : 400m (max)
- Relay : 5V,10A/250V AC 10A/30V DC
- Baud Rate: 9600.
- Diode effusion protection;
- Short response time
SKU: n/a -
Microcontrollers
ESP8266/ ESP-12F Module/ Serial WIFI Witty Cloud Development Board + MINI nodeMCU
- LDR Light Sensor on board
- WS2812 Led on board
- Includes CH340G USB-to-UART programmer
- Includes LDR (light dependent resistor a.k.a photoresistor) connected to ESP’s ADC pin
- Supports 3 modes: AP,STA,AP+STA
- Dimensions: 24mm x 16mm
- Micro USB connection for power and/or programming
SKU: n/a -
Electronic Components & IC's
Extech MA610 600A AC Clamp Meter + NCV
Ask for Latest offer / Availability : https://bit.ly/39Rlc5i
- Brand: Extech
- Model Number: MA610
- Pocket-sized meter with 1.2″ (30mm) jaw size fits conductors up to 500MCM
- Relative mode for capacitance
- Data hold freezes reading on the display
- Auto power off with Disable and low battery indication
- Large backlit LCD display
SKU: n/a -
Temperature and Humidity Sensor
Flame Sensor infrared Receiver Ignition source detection module
Ask for latest offers/availability : https://bit.ly/3bBwavq
- Output Channel: 1
- Power Supply: 3.3/5V
- Built in a potentiometer for sensitivity control.
- Onboard signal output indication, output effective signal is high, at the same time the indicator light up, the output signal can directly connect to microcontroller IO.
- Detection angle about 60 degrees, the flame spectrum especially sensitive.
- The flame of the most sensitive sensors flame, the regular light is also a response, generally used for fire alarm purposes.
SKU: PGI-0012249 -
Temperature and Humidity Sensor
Flame Sensor Module
Ask for latest offers/availability : https://bit.ly/2zn9Sza
- Comparator chip LM393 makes module readings stable.
- Operating voltage 3.3V-5V.
- Fast Response Time
- Sensitivity adjustable
- Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
- Detection range: up to 100 cm.
- Adjustable detection range.
- Detection angle about 60 degrees, it is sensitive to the flame spectrum.
SKU: PGI-0031320 -
Temperature and Humidity Sensor
Flame Sensor Relay Module
Ask for latest offers/availability : https://bit.ly/2KxFnJi
- Can detect the flame or the wavelength at 760 nm to 1100 nm range of the light source, the test flame lighters distance of 80cm, the larger the flame, the greater the distance test
- The detection angle of 60 degrees, the flame spectrum particularly sensitive
- Sensitivity adjustable.
SKU: PGI-00618469 -
Sensors
FlexiForce A101 Force Sensor
Ask for Latest offers/availability : https://bit.ly/3m20Ax6
The A101 is our smallest sensor can measure up to 10 lbs. The dynamic range of this mini force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor
Applications:
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter
SKU: PGI-00125462 -
Load / Pressure / Force / Flex Sensor
FlexiForce A301/1 Force Sensor
Ask for latest offers/availability : https://bit.ly/3cRQWa9
- The A301 is optimized for high volume manufacturing and ideal for embedding into products and applications.
Applications
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter
SKU: PGI-00125465 -
Load / Pressure / Force / Flex Sensor
FlexiForce A401 Force Sensor
Ask for latest offers/availability : https://bit.ly/2YbAVaZ
- The A401 has a 2-pin connector. This is our standard sensor with the largest sensing area The dynamic range of this large force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor.
Applications:
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter
SKU: PGI-00125464 -
Load / Pressure / Force / Flex Sensor
FlexiForce A502 Ultra Thin Force Sensor
Ask for latest offers/availability : https://bit.ly/2yLIH0K
- A502 sensors are square standard sensors with a 2-pin male connector. They have a force range of 0-222 N (0-50 lb), specified with Tekscan electronics. The model is linear through a much lower range of 0-22N (0-5 lb), and is capable of measuring loads up to 44,482 N (10,000 lb).
SKU: PGI-00125463
