IC's
Showing 97–120 of 177 results
-
-
IC's
DAC0800 – 8-bit D/A Converter (pack of 5)
Ask for Latest offer / Availability : https://bit.ly/3632KWf
- Fast settling output current: 100ns
- Complementary current outputs
- Interface directly with TTL, CMOS, PMOS and others
- 2 quadrant wide range multiplying capability
- Wide power supply range
- Low Power Consumption
SKU: n/a -
-
-
-
IC's
ICL7107 – 3+1/2 Digit LED Driver with A/D (pack of 5)
Ask for Latest offer / Availability : https://bit.ly/397Qo0W
- Guaranteed Zero Reading for 0V Input on All Scales
- True Polarity at Zero for Precise Null Detection
- No Additional Active Circuits Required
- Enhanced Display Stability
- Pb-Free Plus Anneal Available (RoHS Compliant)
SKU: n/a -
-
-
IC's
L293D – H-Bridge Motor Driver (pack of 5 )
Ask for Latest offer / Availability : https://bit.ly/3c5BzxN
- The Device is a monolithic integrated high voltage.
- high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads.
- switching power transistors.
- allowing operation at a lower voltage and internal clamp diodes are included.
SKU: n/a -
IC's
L293D DIP Motor Driver IC (pack of 10 )
Ask for Latest offer / Availability : https://bit.ly/3qDX2lB
- Wide range of supply voltage from 4.5 to 36v
- Separate Input Logic Supply can be provided
- Output Current per channel 1A for L293 and 600mA for L293D
- Peak Current per channel 2A for L293 and 1.2A for L293D
- Output Clamp diodes are provided to drive inductive loads in L293D.
- Automatic Thermal Shutdown
SKU: n/a -
-
IC's
L78M09CV (L7809CV) TO-220 Linear Voltage Regulator
Ask for Latest offer / Availability : https://bit.ly/3C0akzs
- Fixed output voltage is 9V
- Output current is 0.5A
- Dropout voltage is 2V
- Maximum DC input voltage is 35V
- Output transition SOA protection
- Output voltage tolerance is 4%
- Operating temperature range 0°C to 125°C
SKU: PGI-00293 -
IC's
LF351 BiFET Op-Amp (JFET input op-amp)
Ask for Latest offer / Availability : https://bit.ly/3iDXspo
- Low Input Bias Current: 50 pA
- Low Input Noise Voltage: 16 nV/ Hz
- Wide Gain Bandwidth: 4.0 MHz
- High Slew Rate: 13V/µs
- Low Supply Current: 1.8 mA per Amplifier
- High Input Impedance: 1012 Ω
- High Common Mode and Supply Voltage Rejection Ratios: 100 dB
SKU: n/a -
IC's
LF356 JFET input op-amp (pack of 10)
Ask for Latest offer / Availability : https://bit.ly/3ofB86J
- Low Supply Current with Large Gain Bandwidth Product
- Offset Voltage: 2 mV max
- Low Input Bias Current: 30pA
- Wide Gain Bandwidth: 2.5 MHz
- High Slew Rate: 5 V/µs
- Low Supply Current: 3.6mA
- Low Total Harmonic Distortion: <0.02%
SKU: n/a -
-
-
IC's
LM2596T-5 – 3A – 5V step down regulator (pack of 10)
Ask for Latest offer / Availability : https://bit.ly/3946fOa
- Step Down Regulator Capable of Delivering 3A
- Wide Input Range up to 40V
- Excellent Line and Load Regulation
- 150 kHz Fixed Frequency Internal Oscillator
- TTL Shutdown Capability
SKU: n/a -
IC's
LM324 – Low Power Quad Op-Amp (pack of 20)
Ask for Latest offer / Availability : https://bit.ly/3sWJQKC
- In the linear mode the input common-mode voltage range includes ground and the output voltage can also swing to ground, even though operated from only a single power supply voltage.
- The unity gain cross frequency is temperature compensated.
- The input bias current is also temperature compensated Advantages.
- Eliminates need for dual supplies.
- Four internally compensated op amps in a single package.
- Allows directly sensing near GND and VOUT also goes to GND.
- Compatible with all forms of logic.
- Power drain suitable for battery operation.
SKU: n/a -