Arduino
Showing 1–24 of 67 results
-
-
Arduino Display
1602 LCD Board Keypad Shield Blue Backlight
- Provides a user-friendly interface that allows users to go through the menu, make selections etc.
- It consists of a 1602 white character blue backlight LCD.
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
SKU: PGI-0012198 -
Arduino Accessories, Prayog Blaster
170 Pin Mini BreadBoard
Ask for Latest offer / Availability : https://bit.ly/3aVPDZW
- Tie-points: 170 (10×17)
- Size: 48 x 35 x 10 mm(LxWxH).
- Use: experimental, testing, robot
- Matching jumper, diameter 0.8mm
- Phosphor bronze nickel plated spring clips
- Accepts a variety of wire sizes (29-20 the AWG)
SKU: PGI-0033059 -
Arduino Accessories, Prayog Blaster
1pc 20cm Male To Male Jumper Wire for Arduino
Ask for Latest offer / Availability : https://bit.ly/3dPKWCG
- 40pcs chromatic male to male color jumper wire.
- Durable and reusable.
- Easy to install and use.
- A popular choice for construction or repair.
- Be used for electronic project and Genuine Arduino product.
SKU: PGI-0010 -
Arduino Accessories, Prayog Blaster
1pcs 20cm Female To Female Jumper Cable for Breadboard,Arduino
Ask for Latest offer / Availability : https://bit.ly/3stV4oS
- This is 20cm female to female color breadboard jumper cable dupont wire for Arduino
- Durable and reusable
- Easy to install and use
- A popular choice for construction or repair
- Be used for electronic project and Genuine Arduino product
SKU: PGI-011 -
Arduino
37 in 1 Sensors Kit compatible with Arduino
Ask for Latest offer / Availability : https://bit.ly/3irdZv9
- For beginners who are interested in Arduino
- A complete set of Arduino’s most common and useful electronic components
- Infrared sensor receiving module
- Laser sensor module
- Temperature and humidity sensor module
- Infrared sensor module
- 5v relay module
- Obstacle avoidance sensor module.
SKU: PGI-0031812 -
Arduino Accessories, Prayog Blaster
400 Tie Points Contacts Mini Circuit Experiment Solderless Breadboard
Arduino Accessories, Prayog Blaster400 Tie Points Contacts Mini Circuit Experiment Solderless Breadboard
Ask for Latest offer / Availability : https://bit.ly/306HNWW
- 400 tie points
- 2 Power lanes, Total 100 tie points in power lanes
- 1 Double strip, Total 300 tie points
- Perfect for Arduino shield prototyping and testing
- Plastic housing, metal contact clips
SKU: PGI-00498432 -
Arduino Shield
ADK USB Host Shield compatible with Arduino
Ask for Latest offer / Availability : https://bit.ly/3oiALrM
- Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards.
- Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host)
- Supports HID devices, such as keyboards, mice, joysticks, etc.
- Compatible with Mass storage devices, such as USB sticks, memory card readers, external hard drives (FAT32 Type File System – Mega Arduino only).
SKU: PGI-003366 -
Arduino Modules
Arduino Nano 3.0 Beginners Kit
Ask for Latest offer / Availability : https://bit.ly/34YVydK
- Great for Starting with Arduino Programming
- A variety of components are included in this pack to try out different projects.
- The kit comes with quality components assured by prayogindia.
- All-in-one kit, a great starter kit for learning to code.
- Microcontroller ATmega328 (SMD) – Interface CH340G
SKU: PGI-00835781 -
-
Arduino Boards
Arduino Portenta H7 Development Board
Ask for Latest offer / Availability : https://bit.ly/34uiwaW
- DUAL CORE – The PH7 has two processors in one, run parallel tasks in different languages
- SELECT ENCRYPTION – Choose between two vendors for the crypto-chip that better suits your case
- USB-C – Power your board, connect it to a display, or get it to work in OTG mode
- MEMORY RANGE – Select the right amount and type of memory for your application
SKU: PGI-800607 -
Arduino Boards, Prayog Blaster
Arduino Uno R3 with Cable
Ask for Latest offer / Availability : https://bit.ly/2O6XPgI
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
SKU: PGI-006337 -
Arduino Accessories
Battery Clip Pair For Arduino/Raspberry-Pi/Robotics
- It consists of insulation and connector.
- Insulation is a type of PVC which is used for electrical wiring to protect from any kind of shock while operating this crocodile clip.
- Connector is made up of high quality stainless steel which has highly strength ability to hold the testing material.
- Above connector , there is a coated with nickel metal to protect it from corrosion and rust.
SKU: n/a -
Arduino
Cytron Maker Drive H-Bridge Motor Driver
- Dual channel, Bi-directional control motor driver
- Support motor voltage from 2.5V to 9.5VDC
- Maximum current up to 1.0A continuous and 1.5A peak (<5 seconds)
- 5V Output (200mA) to power the controller.
- Inputs compatible with 1.8V, 3.3V and 5V logic (Arduino, Raspberry Pi, etc).
- Solid state components provide faster response time and eliminate the wear and tear of mechanical relay
- Regenerative Braking
SKU: n/a -
-
Arduino Modules
ESP8266 Serial WIFI Wireless Transceiver Module Send Receive AP+STA
- Power: 3.3v
- 1MB Flash Memory
- 802.11 b/g/n, 360m range
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
- Power down leakage current of <10uA
- Integrated low power 32-bit CPU could be used as application processor
- SDIO 1.1 / 2.0, SPI, UART
- STBC, 1×1 MIMO, 2×1 MIMO
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
SKU: PGI-0011482 -
Arduino Sensors
Flame Sensor infrared Receiver Ignition source detection module
- Output Channel: 1
- Power Supply: 3.3/5V
- Built in a potentiometer for sensitivity control.
- Onboard signal output indication, output effective signal is high, at the same time the indicator light up, the output signal can directly connect to microcontroller IO.
- Detection angle about 60 degrees, the flame spectrum especially sensitive.
- The flame of the most sensitive sensors flame, the regular light is also a response, generally used for fire alarm purposes.
SKU: n/a -
Arduino Shield
G15 Driver for G15 Cube Servo
Ask for Latest offer / Availability : https://bit.ly/2M3VSkH
-
Maximum Continuous Current: 8A
-
2 x G15 Cube Servo ports (can be daisy chained to more servos)
-
External power terminal for Cube Servo.
-
2 LEDs as logic power and servo power indicators.
-
3.3V and 5V signals compatible.
SKU: PGI-0026016 -
-
Arduino Modules, Motors | Drivers | Actuators Categories, Prayog Blaster
L293D Motor Driver/Servo Shield for Arduino
Arduino Modules, Motors | Drivers | Actuators Categories, Prayog BlasterL293D Motor Driver/Servo Shield for Arduino
Ask for Latest offers/availability : https://bit.ly/3FBPqs6
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
SKU: PGI-009736 -
Arduino Sensors
LDR Light Sensitive Resistor for Light Sensor (5 mm)
- The maximum voltage (V-dc): 150
- The maximum power dissipation (mW): 100
- Ambient temperature (° C): – 30 — +70
- Spectral peak (nm): 540
- Light resistance (10Lux) (KΩ): 2-5
- Dark resistance (MΩ):0.2
- Photoresistor is widely used in toys, lamps, cameras and other industries.
SKU: n/a -
Arduino Boards
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
Ask for Latest offers/availability : https://bit.ly/3bsadRC
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
SKU: PGI-0028446
