EMAX 4.3g Digital Servo Pastic Gear 0.8kg Torque for 3D F3P Airplanes – ES9051.
Package include :
- 1 x EMAX 4.3g Digital Servo Pastic Gear 0.8kg Torque for 3D F3P Airplanes – ES9051.
-11%
3D Accessories
EMAX 4.3g Digital Servo Pastic Gear 0.8kg Torque for 3D F3P Airplanes – ES9051
Ask for Latest offers/availability : https://bit.ly/3kJIVes
EMAX 4.3g Digital Servo Pastic Gear 0.8kg Torque for 3D F3P Airplanes – ES9051.
₹889.00 ₹1,000.00 incl. GST
- Gears: plastics
- Operating voltage: 4.0~5.5V
- STD direction: counter clockwise/pulse traveling 1500 to 1900usec
- Torque(4.8V): 0.8kgf.cm
- Speed(4.8V): 0.09 Sec/60°at no load
- Dimension: 19.74*8.34*23.25mm
- Weight: 4.1g
Based on 0 reviews
Be the first to review “EMAX 4.3g Digital Servo Pastic Gear 0.8kg Torque for 3D F3P Airplanes – ES9051”
Related products
-
3D Accessories, Prayog Blaster
NEMA17 4.2 kg-cm Stepper Motor (With Detachable 70 cm Cable)
Ask for Latest offer / Availability : https://bit.ly/3bQHjev
-
- Step Angle: 1.8 °
- Current: 1.2 A/Phase
- Holding Torque: 4.2 kg-cm
- Detent torque: 2.2 N.cm (Maximum)
- Lead Wires: 4
- Shaft diameter: 5 mm
SKU: PG-0051732 -
-
3D Accessories
CNC 3D Printer Mech Endstop Switch For RepRap Makerbot Prusa Mendel RAMPS1.4
Ask for Latest offers/availability : https://bit.ly/3o6LBVv
The mechanical endstop uses a lever switch to detect when it is activated. The switch is wired up so that when activated, it pulls the signal to LOW. There is also an LED on the board that will light up when the switch is activated.It uses a standard 4 pin .100″” pitch header and accepts a standard, old-style CD-ROM audio connector cable. Brand new and high quality. The endstop is a reliable endstop / switch solution for any type of 3D printers and other CNC and/ or 3D tools.
SKU: PGI-0012030 -
3D Accessories
DRV8825 stepper motor driver Module arduino 3D printer RAMPS1.4 RepRap StepStick
Ask for Latest offers/availability : https://bit.ly/3CLAup5
- Simple step and direction control interface
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
- 45 V maximum supply voltage
- Built-in regulator (no external logic voltage supply needed)
- Can interface directly with 3.3 V and 5 V systems
- Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
- Short-to-ground and shorted-load protection
- layer, 2 oz copper PCB for improved heat dissipation.
SKU: PGI-006721 -
3D Accessories
Dual H-bridge driver L293D Two DC motor or One Stepper Motor Module
Ask for Latest offers/availability : https://bit.ly/3ud0XZE
- Arduino / Raspberry Pi L293D H-Bridge 4 Channel Dc Motor Control Support Pulse With Modulation
- Tested in Arduino, Raspberry, IOIO & Node MCU
- Input Voltage: DC4.5v – 25V
- Output Current: 600mA Per Channel
- Peak Current: 1.2A Non Repetitive Per Channel Enable Facility
- IC Protection: Auto Shut on High Temperature
SKU: PGI-363
There are no reviews yet.