16×2 Character LCD Display With Yellow Backlight

If you want to add some visual output to your Arduino projects, you’ll need a display. If you need only a little to display, the LCD 16×2 Parallel LCD Display is a quite good solution.

This is the great yellow backlight LCD display. It is fantastic for Arduino based project. This LCD 16×2 Parallel LCD Display with Yellow Backlight is very easy to interface with Arduino or Other Microcontrollers.This is LCD 16×2 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 Black on RGB Liquid Crystal Display into your project. The display is 16 character by 2 line display has a very clear and high contrast black text upon a yellow background/backlight.

The values shown on the display can be either simple text or numerical values read by the sensors, such as temperature or pressure, or even the number of cycles that the Arduino is performing.

Features :

1. 16 characters wide, 2 rows
2. Black text on the yellow background
3. Single LED backlight included can be dimmed easily with a resistor or PWM.
4. Can be fully controlled with only 6 digital lines! (Any analog/digital pins can be used)

      Specifications:

1. Display： 16×2 character
2. Outline： 80.0×36.0×14.5
3. VA： 64.5×14.5
4. Controller： SPLC780D
5. Character： 2.95×4.35
6. Driver： 1/16
7. LCD： STN Yellow Green
8. Backlight： Yellow Green LED

Package Includes :

1 x 16×2 Character LCD Display With Yellow Backlight